Turn signal LED wiring - help?
#1
Junior Member
Thread Starter
Join Date: Feb 2003
Location: Worcester, MA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Turn signal LED wiring - help?
I just installed a new pair of M3 mirrors on my 98 Accord EX. It was too damn cold to do the wiring for the LED turn signals. I basically know what I am doing, and trying to find out some more info first. I was wondering if anyone knew anything about doing it, and splicing the wires correctly, so I don't screw anything up.
#3
Originally posted by snowmansur
I just bought a pair of M3 mirrors for my 98 Accord Coupe LX. How do you install these damn things? Thanks
I just bought a pair of M3 mirrors for my 98 Accord Coupe LX. How do you install these damn things? Thanks
#4
Registered User
Join Date: Nov 2003
Location: Slidell, LA
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
get yourself one of those little probe things from an auto part store. it's got a needle on one side and a cable on the other.
hook the wire to a ground, and turn your blinker on. probe the wires under the dash (under the steering wheel) and probe for the wire that gives a pulsing signal when the left or right blinker is on and tap into them.
Here's a list of the diff wire colors... Don't see any for blinkers though so good luck..
Constant 12V+ White Passenger's Side Fuse Panel or Ignition Harness
Starter Black/White Near Heater/AC Fan Motor
Ignition Black/Yellow Ignition Switch Harness
Ignition 2 White/Black Ignition Switch Harness (ABS Light)
Accessory Yellow Ignition Switch Harness
Tach Blue Distributor
Brake Switch Green/White Brake Switch
Trunk Release White/Red (+) Driver's Side Grey Molex
Trunk Pin Orange (-) Driver's Kick GREY Molex Connector
Parking Lights Red/Black Fuse Panel
Head Lamp Blue Left of Column Blue Connector
Hood Pin Yellow (-) Passenger's Side Green Connector
Factory Disarm Blue Driver's Door
Door Trigger Black/White (-) Passenger's Side Fuse Panel
Door Lock Black/Blue or Black/Red Panel Passenger's Side near Door
Door Unlock Orange (-)
Horn Wire Light Green/Blue Passenger's Side Fuse Panel
hook the wire to a ground, and turn your blinker on. probe the wires under the dash (under the steering wheel) and probe for the wire that gives a pulsing signal when the left or right blinker is on and tap into them.
Here's a list of the diff wire colors... Don't see any for blinkers though so good luck..
Constant 12V+ White Passenger's Side Fuse Panel or Ignition Harness
Starter Black/White Near Heater/AC Fan Motor
Ignition Black/Yellow Ignition Switch Harness
Ignition 2 White/Black Ignition Switch Harness (ABS Light)
Accessory Yellow Ignition Switch Harness
Tach Blue Distributor
Brake Switch Green/White Brake Switch
Trunk Release White/Red (+) Driver's Side Grey Molex
Trunk Pin Orange (-) Driver's Kick GREY Molex Connector
Parking Lights Red/Black Fuse Panel
Head Lamp Blue Left of Column Blue Connector
Hood Pin Yellow (-) Passenger's Side Green Connector
Factory Disarm Blue Driver's Door
Door Trigger Black/White (-) Passenger's Side Fuse Panel
Door Lock Black/Blue or Black/Red Panel Passenger's Side near Door
Door Unlock Orange (-)
Horn Wire Light Green/Blue Passenger's Side Fuse Panel