d16z6 d16y8 same map sensor????????
11-28-2003, 03:31 PM
#2
Hybrid Forum Moderator
Join Date: Mar 2000
Location: Southwestern PA
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
I believe all D and B-series engines use the same map sensor but I am not 100% sure. Some motors have a map sensor that mounts on the firewall and are connected to the TB by a short piece of rubber hose while most are just mounted directly to the TB. I believe both the Z6 and Y8 use the same on-TB sensor.
I remember helping a local shop with a swap and the JDM engine they had needed a firewall MAP sensor and they either modified the stock one to work or got one from a 4-door EG LX (I think). Sorry, it's been a few years and I don't remember exactly but I'm pretty sure it worked.
I remember helping a local shop with a swap and the JDM engine they had needed a firewall MAP sensor and they either modified the stock one to work or got one from a 4-door EG LX (I think). Sorry, it's been a few years and I don't remember exactly but I'm pretty sure it worked.
__________________
Andy - Reinstated Hybrid Forum Moderator
'06 Subaru Legacy Spec B - Stock, for now
'98 Civic EX - CTR headlights and grill, Kosei K1's, for sale
'90 240SX - SR20DET that will never get installed, project car.
Andy - Reinstated Hybrid Forum Moderator
'06 Subaru Legacy Spec B - Stock, for now
'98 Civic EX - CTR headlights and grill, Kosei K1's, for sale
'90 240SX - SR20DET that will never get installed, project car.
11-28-2003, 10:59 PM
#3
Senior Member
Join Date: Jul 2003
Posts: 1,800
Likes: 0
Received 0 Likes
on
0 Posts
I have a 93 civic 4dr LX and the engine that was in my car used a map sensor on the firewall. The engine I put in had the MAP sensor on the throttle body. I was just told to swap the intake and everything worked fine. And I'm still using the MAP sensor from the firewall.
