Notices

oil burning

Thread Tools
 
Old 11-27-2003, 06:56 AM
  #1  
sky-sol
lets get funk-a-fied
Thread Starter
 
sky-sol's Avatar
 
Join Date: Nov 2003
Location: San Antonio
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default oil burning

i've seen this on a few other hondas and a few other sols, when i stomp on the gas in 3rd my car puffs smoke like a chimeny. i dosn't do it when i'm stoped and it won't allwas do it in 2nd. scince i've had my car i've had the oil changed twice and both times the over filed it by like 1/2 liter it was way over the fill circle well i took it to a honda dealership and they did it right. i want to change my own oil now and i was just wondering if the over fill in the oil over a period of 9 years would make my car smoke and what is the best oil to change your car with?
Old 11-27-2003, 07:21 AM
  #2  
Falkon
still alive
 
Falkon's Avatar
 
Join Date: Sep 2002
Location: Huntsville, AL
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
Default

Mobil 1 10w-30 or 5w-30. either one.

are you sure you're not just running rich? dirty air filter or bad 02 sensor will do that.
Old 11-27-2003, 07:23 AM
  #3  
Bakeoff
wooooo woooooooooo
 
Bakeoff's Avatar
 
Join Date: Mar 2002
Location: Twin Cities
Posts: 3,134
Likes: 0
Received 0 Likes on 0 Posts
Default

If it's over filled, it'll blow past the rings and get burned up. It's not really good for the rings, but I'm wondering if you're just burning off the excess....
Old 11-27-2003, 07:31 AM
  #4  
sky-sol
lets get funk-a-fied
Thread Starter
 
sky-sol's Avatar
 
Join Date: Nov 2003
Location: San Antonio
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default

well the oil level really dosen't go down over the 3,000 miles i looked for that. i had an o2 sensor problem on my other car but i never saw any oil burning with that. i tried to check the air filter but the stupid dealership screwed on the box sooooo tight i broke a screwdriver trying to open it
Old 11-27-2003, 02:50 PM
  #5  
OSX2000
Do what must be done.
 
OSX2000's Avatar
 
Join Date: Apr 2003
Location: Fountain Valley, CA
Posts: 1,901
Likes: 0
Received 0 Likes on 0 Posts
Default

Don't use a screwdriver to get the airbox open! You will almost always strip out the screws! Look at the sides of it...I think it's an 8mm.
Old 11-27-2003, 05:56 PM
  #6  
sky-sol
lets get funk-a-fied
Thread Starter
 
sky-sol's Avatar
 
Join Date: Nov 2003
Location: San Antonio
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default

i tried to use a socket wrench and the damn thing would just click past the turning point and spin in both directions :dunno:
i think i have to get a real wrench
Old 11-27-2003, 06:58 PM
  #7  
sxecrow
Banned
 
sxecrow's Avatar
 
Join Date: May 2003
Location: Tampa, FL
Posts: 4,058
Likes: 0
Received 0 Likes on 0 Posts
Default

yea, I have that issue when I go to around 7 or 8000 rpm's.
Old 11-28-2003, 01:03 AM
  #8  
OSX2000
Do what must be done.
 
OSX2000's Avatar
 
Join Date: Apr 2003
Location: Fountain Valley, CA
Posts: 1,901
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally posted by sky-sol
i tried to use a socket wrench and the damn thing would just click past the turning point and spin in both directions :dunno:
Then ditch that cheap socket set and buy a good set! Look in your sockets...if it's a 6 sided hexagon, they're better. The ones with the 12 edged star things just suck.
Old 11-28-2003, 06:48 PM
  #9  
sky-sol
lets get funk-a-fied
Thread Starter
 
sky-sol's Avatar
 
Join Date: Nov 2003
Location: San Antonio
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default

hey hey christmas is right around the corner :bowdown:
Old 11-29-2003, 01:11 PM
  #10  
Falkon
still alive
 
Falkon's Avatar
 
Join Date: Sep 2002
Location: Huntsville, AL
Posts: 841
Likes: 0
Received 0 Likes on 0 Posts
Default

I need a 50 gallon air compressor and a nice impact wrench.

OSX2000claus would you pleeeeaase? I'll leave you cookies.. or a case of O3 or something.



All times are GMT -8. The time now is 10:49 PM.