Notices

AutoX and first gear questions?

Thread Tools
 
Old 07-21-2002, 11:42 AM
  #1  
StyleTEG
Make me an offer
Thread Starter
 
StyleTEG's Avatar
 
Join Date: Mar 2002
Location: Ann Arbor, Michigan
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Default AutoX and first gear questions?

Went to my first AutoX today, and I absolutely loved it. Most fun I have had in my car since I bought it.

I have a question about downshifting to 1st gear. Durring autocross, there was about two straight aways that I really needed to be in second gear, the rest 1st should have been the gear of choice.

After I shift to second, I can not for the life of me get it back into fist unless I am going REAAALY slow (and yes I am rev matching). Seams all the integras I have driven, have this problem/safety, any way around it? Does the ITR/SI tranny have this safety too?

Thanks in advance
Old 07-21-2002, 11:54 AM
  #2  
Weston
Member
 
Weston's Avatar
 
Join Date: Jun 2002
Location: Lafayette, CO
Posts: 141
Likes: 0
Received 0 Likes on 0 Posts
Default

Double clutching seems to do the trick for me, but I haven't tried to do it during autocross conditions.
Old 07-21-2002, 12:01 PM
  #3  
StyleTEG
Make me an offer
Thread Starter
 
StyleTEG's Avatar
 
Join Date: Mar 2002
Location: Ann Arbor, Michigan
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Default

Hmm, I will have to try letting the clutch out. I really shouldn't have to do that since it has syncro's, just revmatching should be enough. But if it works, its better than staying in 2nd
Old 07-21-2002, 08:56 PM
  #4  
thx247
Senior Member
 
thx247's Avatar
 
Join Date: May 2002
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts
Default

1st gear does not have syncros. If your going at a speed that first gear can handle you just have to rev the **** out of the motor to get it into first gear. I've never had a problem doing it before, even at a auto X. In a GSR if your going 30 mph for example, thats like 6,500 or 7,000 rpm. High isnt it. I suggest doing it only on hairpin turns though, otherwise its faster just to stay in 2nd.
Old 07-22-2002, 05:25 AM
  #5  
PatrickGSR94
I'm not a n00b!
 
PatrickGSR94's Avatar
 
Join Date: Mar 2002
Location: Memphis TN
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally posted by thx247
1st gear does not have syncros. If your going at a speed that first gear can handle you just have to rev the **** out of the motor to get it into first gear. I've never had a problem doing it before, even at a auto X. In a GSR if your going 30 mph for example, thats like 6,500 or 7,000 rpm. High isnt it. I suggest doing it only on hairpin turns though, otherwise its faster just to stay in 2nd.
I had to go into 1st around the two 180's on the course I ran on, I just revved it up real good until it would go into 1st.
Old 07-22-2002, 05:42 AM
  #6  
drdavidge
Senior Member
 
drdavidge's Avatar
 
Join Date: May 2002
Location: NJ
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Default

i thought downshifting into first was bad to do?
Old 07-22-2002, 07:48 AM
  #7  
PatrickGSR94
I'm not a n00b!
 
PatrickGSR94's Avatar
 
Join Date: Mar 2002
Location: Memphis TN
Posts: 313
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally posted by drdavidge
i thought downshifting into first was bad to do?
Well when you're doing ~20mph around a 180 and you need to power out, you don't have much choice if you don't want to bog and want any kind of decent times. I didn't have much trouble getting mine into 1st as long as I brought the revs up enough.
Old 07-22-2002, 07:56 AM
  #8  
StyleTEG
Make me an offer
Thread Starter
 
StyleTEG's Avatar
 
Join Date: Mar 2002
Location: Ann Arbor, Michigan
Posts: 193
Likes: 0
Received 0 Likes on 0 Posts
Default

Guess I wasn't reving high enough when I was trying to get it into 1st. There were definetly two turns where I would bog every time.

Thanks for the tips
Old 07-22-2002, 08:20 AM
  #9  
drdavidge
Senior Member
 
drdavidge's Avatar
 
Join Date: May 2002
Location: NJ
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Default

lets all put synchros on our first gears..haha.
Old 07-22-2002, 09:15 AM
  #10  
thx247
Senior Member
 
thx247's Avatar
 
Join Date: May 2002
Posts: 567
Likes: 0
Received 0 Likes on 0 Posts
Default

yeh just rev the snot out of it, should be fine. I always get wheel spin when I downshift into first on the auto x course though...and massive torque steer lol


Quick Reply: AutoX and first gear questions?



All times are GMT -8. The time now is 04:50 PM.