6th gen Accord: Front Camber kits

[LX4CYL]

It won't be a year 'till I actually get to work on the suspension, but I am just curious... I'm addicted to autocrossing, and the outsides of my tires wear easily when I have 0 front camber. I already know that my future 1.7"F/1.2"R drop will produce somewhere around -1.2 rear camber, and around -0.5 front camber. I know that I do not need to get a camber kit to reduce tire wear on the street. However, at an auto-x course, the front tires may need a little more negative camber. I would like to be able to increase the negative camber in the front for an event, and then be able to return it to normal before I hit the highway. I only know of 3 brands: Eibach, SPC, and Ingalls. Which one of these are the best when it comes to build quality and zero crap problems (such as hitting the fender)? Should I be getting an offset ball joint, or an adjustable control arm-type camber kit? I'm just asking what camber kit is the best, so please post all auto-x front camber related comments here: http://www.honda-acura.net/forums/sh...hreadid=105648

Registered and logged-in users don't see this ad! Register your free account today.

[b12uceHuy]

You know each time you adjust your camber you need to get an alignment.

[LX4CYL]

Originally posted by b12uceHuy
You know each time you adjust your camber you need to get an alignment.

yeah, but if I adjust it back to how it was before the event, all is good.

[b12uceHuy]

Skunk2 and SPC are good Camber Kits

[LX4CYL]

yeah, I'm looking at the SPC. Never seen anyone with the skunk2 though...