Crappy springs!!
#1
I'm like dis'........
Thread Starter
Join Date: Sep 2002
Location: St. Louis, MO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Crappy springs!!
Ok, here is my predicament. I bought the Tokico suspension kit with Illuminas and Tokico's springs which claim to lower 1.5 all around. My problem is, I don't like the ride height, it seems too low for 1.5. The front is ok, but the back, I only have like maybe one finger gap between the wheel well at most. I want about a 2 finger gap or maybe a little more. What ride height do you guys think that might be and what kind of springs would you guys recommend to give me this height. Thanks a lot.
Jeff
Jeff
#2
I miss my 93 VTEC Lude :(
Join Date: Sep 2003
Location: South Jersey
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
#4
NAM #0001
Join Date: Jun 2002
Location: Cornelius, NC
Posts: 4,050
Likes: 0
Received 0 Likes
on
0 Posts
If you get true coilovers, then they're better than springs.
You could always switch out your H&R springs for some Ground Control coilovers and get some Tokico shocks, you'd be set.
You could always switch out your H&R springs for some Ground Control coilovers and get some Tokico shocks, you'd be set.
#5
Originally posted by illnasty
what if i ride on stock suspension with H&R springs... would it be any good?
what if i ride on stock suspension with H&R springs... would it be any good?
#6
I'm like dis'........
Thread Starter
Join Date: Sep 2002
Location: St. Louis, MO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
H&R OE and Neuspeed Sofsport both drop a .75 all around. Which springs do you guys recommend? Anybody with pics of these springs on there car? Thanks
#8
I'm like dis'........
Thread Starter
Join Date: Sep 2002
Location: St. Louis, MO
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
sure, give me a couple a days. It's raining here in St. Louis and I am gonna be gone this weekend. Give me til monday and I will get her cleaned up and take some pics.