Your Dream Suspension Setup
10-12-2003, 03:01 PM
#4
I hate 2003 Noobs.
Join Date: Aug 2002
Location: tx
Posts: 5,112
Likes: 0
Received 0 Likes
on
0 Posts
Tein flex (already have) 
h:
SRR Spherical Steering Tie Rods
Type One Front Lower Tie Bar
Nagisa Auto Front Support Bars
Si Front Sway Bar (26mm)
J’s Racing Rear Pillar Bar
Backyard Special Rear Performance Rod
Comptech Rear Sway & Tie Bar (22mm)
SRR Rear Lower Control Arms
SRR Rear Camber Kit
Mugen Front Compliance Bushings
Prothane Polyurethane Rear Trailing Arm Bushings
h:SRR Spherical Steering Tie Rods
Type One Front Lower Tie Bar
Nagisa Auto Front Support Bars
Si Front Sway Bar (26mm)
J’s Racing Rear Pillar Bar
Backyard Special Rear Performance Rod
Comptech Rear Sway & Tie Bar (22mm)
SRR Rear Lower Control Arms
SRR Rear Camber Kit
Mugen Front Compliance Bushings
Prothane Polyurethane Rear Trailing Arm Bushings
10-12-2003, 11:49 PM
#6
Nurburgring junkie
Join Date: Apr 2003
Location: Jalalabad, Afghanistan
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
hmmm, probably some bump and rebound adjust able shocks from MOTON and front spring rate of around 550front/650 rear. Too bad Motons run around a G a piece
10-13-2003, 12:42 AM
#7
I got worms.
Thread Starter
Join Date: Jul 2000
Location: Utah
Posts: 32,238
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by txhatch
Tein flex (already have)h:
SRR Spherical Steering Tie Rods
Type One Front Lower Tie Bar
Nagisa Auto Front Support Bars
Si Front Sway Bar (26mm)
J’s Racing Rear Pillar Bar
Backyard Special Rear Performance Rod
Comptech Rear Sway & Tie Bar (22mm)
SRR Rear Lower Control Arms
SRR Rear Camber Kit
Mugen Front Compliance Bushings
Prothane Polyurethane Rear Trailing Arm Bushings
Tein flex (already have)
h:SRR Spherical Steering Tie Rods
Type One Front Lower Tie Bar
Nagisa Auto Front Support Bars
Si Front Sway Bar (26mm)
J’s Racing Rear Pillar Bar
Backyard Special Rear Performance Rod
Comptech Rear Sway & Tie Bar (22mm)
SRR Rear Lower Control Arms
SRR Rear Camber Kit
Mugen Front Compliance Bushings
Prothane Polyurethane Rear Trailing Arm Bushings
Originally posted by ChizzleC
bags.
bags.
Originally posted by pythonscott
hmmm, probably some bump and rebound adjust able shocks from MOTON and front spring rate of around 550front/650 rear. Too bad Motons run around a G a piece
hmmm, probably some bump and rebound adjust able shocks from MOTON and front spring rate of around 550front/650 rear. Too bad Motons run around a G a piece
.
__________________
99 Integra GSR
06 TSX
duck squad member #00003
99 Integra GSR
06 TSX
duck squad member #00003
10-13-2003, 01:04 AM
#8
I hate 2003 Noobs.
Join Date: Aug 2002
Location: tx
Posts: 5,112
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 94civicEX
This is exactly what I was looking for :thumbup:.
This is exactly what I was looking for :thumbup:.
h: What is your dream setup 94civicex?
10-13-2003, 01:15 AM
#9
I got worms.
Thread Starter
Join Date: Jul 2000
Location: Utah
Posts: 32,238
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by txhatch
Most people think suspension ends after coilovers, shocks, and strut bars.h:
What is your dream setup 94civicex?
Most people think suspension ends after coilovers, shocks, and strut bars.
h: What is your dream setup 94civicex?
Coils: Tein Flex
Bars: Carbing Front Strut Tower Bar, Cusco Front Sway?, Comptech Rear Tie/Sway adjustable Combo, ITR Rear Strut bar?, C-Pillar Bar (can't remember who makes them at this moment
)SRR Rear LCA's
ITR trunk brace
Misc Energy Suspension bushings
I think that's it...I don't know enough about it to say much more...sounds tight to me though
h:.
__________________
99 Integra GSR
06 TSX
duck squad member #00003
99 Integra GSR
06 TSX
duck squad member #00003
10-13-2003, 10:22 AM
#10
Senior Member
Join Date: Oct 1999
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
not dream setup... but pretty decent:
GC w/ Koni yellow adapters
Neuspeed front strut bar
ingalls camber kit
205/50/15 Falken Azenis
I want to get a brembo big brake kit though :drool:
GC w/ Koni yellow adapters
Neuspeed front strut bar
ingalls camber kit
205/50/15 Falken Azenis
I want to get a brembo big brake kit though :drool: