pimpingacura

Does anyone have one for a 99 integra on the computer that they could zip to me? I just bought a integra and I am not familiar with this year.
thanks

Snoopy

https://www.honda-acura.net/forums/s...ervice+manuals

pimpingacura

Thanks for the link but when I try it it locks my computer up is that happen to anyone else?

Daniel

Don't click the link. It doesn't seem to be up. Is there certain information you are wanting from it? I have one sitting next to you that I can attempt to help you out with.

pimpingacura

I need torque specs for some things. It is a 99 integra LS B18B
I need specs for :
Cam keepers
Head bolts
engine to transmission
valve clearance specs should be about .007 or something
crank pulley torque spec
thanks

Daniel

Camshaft holders: 7.2 lb-ft
Camshaft holder plates: 20 lb-ft (apply engine oil to bolt threads. Temporarily tighten the bolts, then tighten completely in the following order:
12 - 9 - 5 - 1 - 3 - 7 - 11
14 - 10 - 6 - 2 - 7 - 8 - 12

As a point of reference, 1 and 2 are your center bolts on the camshaft holder plates.)
Head bolts: This is a two step process. Tighten all bolts in sequence to 22 lb-ft. Then, tighten them in the same sequence to 63 lb-ft. (also apply engine oil to the bolt threads and under the bolt heads)
Lower transmission mounting bolts(2): 47 lb-ft
Rear mount bracket bolts(2): 87 lb-ft (these are next to one of the lower transmission mounting bolts)
Upper transmission mounting bolts(3): 47 lb-ft
You did not specify which valves so...
Intake Valve Stem-to-Guide Clearance:
- Standard (New) 0.05-0.11mm / 0.002-0.004 in
- Service Limit: 0.16 mm / 0.0006 in
Exhaust Valve Stem-to-Guide Clearance:
- Standard (New) 0.10-0.16mm / 0.004-0.006 in
- Service Limit: 0.22 / 0.009 in
Crankshaft Pulley Bolt: 130 lb-ft

Hope that helps...

a2k

hey man, do you have an aol, or other e-mail, i can fire a copy off to you...actually it is for a 1994 teg, but it is all roughly the same...better then nothing, anyone that wants a copy, just let me know, if enough poeple want it, then i might just post it on a free web server, or anyone who will host me any way... i aslo have one for '96-'98 civic if any one wants it... let me know...L8er actually, it is the factory service manual..same as helms i think, either way it is still god when it comes to our cars
*peace out*

pimpingacura

That would be great if you could zip me the file. My email is pimpingacura@hotmail.com Thanks a lot.

Creep

I can get it out to you, but your hotmail will never take it.

It's 38 meg zipped...

Mail me, andre_chouinard@hotmail.com and ill post it somewhere for ya.