How much for a full swap?
#1
How much for a full swap?
B16a2 .... i wanna know how much for a full swap.
i have no ida how to install the motor so there for i would have to pay some one about a grand maybe or so to install it but. lets say i get the motor off ebay. how much total do you think it will cost?
Or Do any of you guys know any web site that sells the motor with every thing needed?
PS: i have a auto so there for i would have to swich right? Or should i just make it easy and buy a Auto B16?
i have no ida how to install the motor so there for i would have to pay some one about a grand maybe or so to install it but. lets say i get the motor off ebay. how much total do you think it will cost?
Or Do any of you guys know any web site that sells the motor with every thing needed?
PS: i have a auto so there for i would have to swich right? Or should i just make it easy and buy a Auto B16?
#2
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
Where is the swap coming from? That's the 96-97 del Sol VTEC and 99-00 Si engine, right?
There are a few sites that sell swaps, my personnal favorite is hmotorsonline.com
If you have an auto, convert it to a manual. Automatic gearing is horrible on VTEC engines, it's way too long.
There are a few sites that sell swaps, my personnal favorite is hmotorsonline.com
If you have an auto, convert it to a manual. Automatic gearing is horrible on VTEC engines, it's way too long.
#3
Still here... sorta...
You need to search.
This topic has been covered 1937039r84439647389u24632473 times.
the B16 itself isn't auto, it's the tranny. The motor that you get is transmission non-specific - just that the one you get has to be for a B series.
Did they even make a B16 auto? I think you'd have to get an LS or GSR tranny, but it will work.
This topic has been covered 1937039r84439647389u24632473 times.
the B16 itself isn't auto, it's the tranny. The motor that you get is transmission non-specific - just that the one you get has to be for a B series.
Did they even make a B16 auto? I think you'd have to get an LS or GSR tranny, but it will work.
#5
Still here... sorta...
The DelSol must have had an Auto version then cause I'm 90% sure the '99-'00 Si wasn't auto.
Is it a B16A2 or B16A3?
Do a google search for B16A and see what the shops are selling them for.
I wouldn't buy a motor off of Ebay. You will regret it I assure you.
I don't remember what sites sell them. I'm pretty sure that one of our sponsors does... http://www.japandomesticmotor.com/
Is it a B16A2 or B16A3?
Do a google search for B16A and see what the shops are selling them for.
I wouldn't buy a motor off of Ebay. You will regret it I assure you.
I don't remember what sites sell them. I'm pretty sure that one of our sponsors does... http://www.japandomesticmotor.com/
#6
Rotorphile.
Join Date: Mar 2002
Location: Richmond, VA
Posts: 10,120
Likes: 0
Received 0 Likes
on
0 Posts
I think he's confusing the B16A2 USDM motor with the SiR-II second gen B16A.
The autos do exist, unfortunately. There is some speculation as to the cams they use, some say they are less aggressive, so the engines may be slightly different then the manuals. Nothing Crower can't fix.
The autos do exist, unfortunately. There is some speculation as to the cams they use, some say they are less aggressive, so the engines may be slightly different then the manuals. Nothing Crower can't fix.