Import Street Scenes - News, photos, videos and info .. straight from the streets!
http://www.importstreetscenes.com
Thanks
www.accordracing.com for the DIY
---------------------
- This is the Project Accord before installation
- Remove upper grille clips using a flathead screwdriver
- Remove lower bumper clips using a flathead screwdriver.
- Remove the bolts located in right & left upper fender well corner
- Remove the bolts located in right & left lower fender well corner.
- The bumper cover can now be removed from the vehicle.
- Place the GrillCraft Grille into bumper opening and align grille pin with bumper center (note the vertical support)