throttle body CLEAN
just cleaned my throttle body today for my 6gen accord
You will need: -Screw driver -1 can of Sea Foam -a Can -a baseter tube or funnle tube -a straw (from a sports bottle) http://www.imagestation.com/picture/...1/fb9085d4.jpg http://img.photobucket.com/albums/v1...y/4fbf8075.jpg This is the engine bay http://img.photobucket.com/albums/v1...y/12cc8f93.jpg Your throttle body is connected to your intake you want to remove it by using your screw driver, then you will stick the straw into the throttle body plate inside http://img.photobucket.com/albums/v1...y/e9e40ab9.jpg It should look like that with the intake removed http://img.photobucket.com/albums/v1...y/aa426203.jpg http://img.photobucket.com/albums/v1...y/23fdec60.jpg you can stick the tube in to the TB http://img.photobucket.com/albums/v1...y/IMG_0083.jpg |
It should look something like this, you can pour the Seafoam into the funnel slowly 1/3 of the can your engine should choke and cut off you'll also see smoke coming out of ur exhast, once you finish pouring the SF into the intake let your car set for 5mins then start your car and go for a ride WOT.
http://img.photobucket.com/albums/v1...y/IMG_0082.jpg start your engine and step on the gas a little http://www.imagestation.com/picture/...5/fb9086aa.jpg http://img.photobucket.com/albums/v1...y/IMG_0080.jpg POOF a shit load of smoke will come out http://www.imagestation.com/picture/...3/fb9086f6.jpg Time for you to get in to your car and go WOT around the block maybe even a trip on the freeway. Do this a couple of times |
Sorry for asking a noob question but where is that throttle body plate in the pix? If it'snot visible can u post a better pix of it.
|
the trottle plate is INSIDE the throttle body you have to use your finger and push the straw in, its difficult to take a picture of it. Looks just like a carbator but sideways.
|
Hmmm that kinda helps. Oh well I just don't know how do you get that place in the first place. Do you have to remove the intake or what?
|
great idea with the straw, for some reason i didnt think of that, and just used a turkey baster to inject it in, while pulling a little on the throttle cable, spilled a lot of shit all down in my engine compartment, hope it doesnt hurt anything ;)
Matt |
Originally posted by pirate252 great idea with the straw, for some reason i didnt think of that, and just used a turkey baster to inject it in, while pulling a little on the throttle cable, spilled a lot of shit all down in my engine compartment, hope it doesnt hurt anything ;) Matt |
hmm I've been trying to find that Sea Foam but my local NAPA store doesn't carry it!
|
i just use a can of stp intake and throttle body cleaner from autozone
|
how exactly would sea foam clean this all up...never heard of sea foam
|
your car was off and warmed up when you did it? or did u let it go on a cold engine, and also... idd you let it sit 5 mins or just hook it back up and go/
|
my car was on when i did it and the engine was COLD... after i pure 1/3 of the bottle in to the TB i turned off the engine. Let it set fo 5-6 mins then took a spin around the block then into the street WOT.
|
I did my friends 94 accord and when I place the straw into the TB plate it rev the engine to high so what we did was inject the sea foam then start the engine (so the liquid would be sucked into the TB) did that 8 times, then let it sit for 5-6mins. Took a spin on the freeway WOT. could be done both ways
*** just dont pour it liquid all at once into the TB or you'll hydo lock your engine *** take your time |
I agree on the bottle from autozone...
|
i did this with the STP spray... and my car now has an idle surging problem... dont ask me what caused it... everything is installed correctly. :(
|
YOU DID IT WRONG, YOUR CAR IS GONNA DIE!
|
Originally posted by Samson i did this with the STP spray... and my car now has an idle surging problem... dont ask me what caused it... everything is installed correctly. :( You F'd up your MAP Sensor. :oh: Some Carb/TB cleaner will mess it up. Is your CEL (check engine light) on? |
BUMP! can someone update the pictures? they don't seem to be "available at this time" what's it doing, taking a shit?
|
Originally Posted by YeaItsAFourDoor
YOU DID IT WRONG, YOUR CAR IS GONNA DIE!
|
I just cleaned my TB again this weekend and updated with new pictures.
|
Why/how does this help the car?
|
i know this is an old post but since its already back form the dead:
why is this thread called "How to clean your throttle body"? this method doesn't clean your throttle body. cleaning your throttle body would involve removing it, and disasembling the plate and everything to clean out any build up that might cause a sticky tb plate etc this method cleans the intake manifold and combustion chamber. merry xmas everyone -Luke |
good point :rockon:
|
y would u want to clean ur intake manifold and combustion chamber?
|
Originally Posted by tigerafro
(Post 3623187)
y would u want to clean ur intake manifold and combustion chamber?
Why wouldn't you?? The sea foam burns off the carbon build up and such improving your cars ability to breath and burn the fuel better. |
Samson, an idle problem is usually caused by a dirty or bad IACV.
How long does it take to get rid of all the smoke from the exhaust? Do you keep the car on when you are pouring in the seafoam? |
Anybody have DIY instructions for an 00 EX V6?
|
seafoam
Originally Posted by firebane
(Post 1071585)
hmm I've been trying to find that Sea Foam but my local NAPA store doesn't carry it!
|
has anyone tryed seafoam trans flush
|
Throttle body..
I just cleaned my car's throttle body using Deep Creep.
I noticed that the engine oil is a little (blacker) darker. Do i need to change engine oil? |
All times are GMT -8. The time now is 04:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands