15 inch sub, 4 channel amp, alot of wires, distro blocks etc (PA)

[Nors]

Please email me all offers or pm me. Pictures can be sent via email. I'll ship everything besides the sub and amp just because I don't trust the amp getting anywhere undamaged.

1 Audiobahn AW151t 15 inch subwoofer - less then 6 months old (Specs and pictures at bottom)
1 Q-Logic Box for the 15 inch subwoofer - (Less then 6 months old, has sub installed)(QLH-2.2515SS)(Specs and pictures at bottom)
1 Audiobahn 4 Channel amplifier, intake series (A4004t)(Specs and pictures at bottom) (The air intake does not work anymore but everything else works great)

Various car stereo installation pieces:

25 feet of 4 gauge wire (USED)
1 Battery terminal (NEW)
2 In-line fuse holders (USED) pending
1 Distribution block (Description below)(NEW)
1 Street Wires Fused Distribution block (Used)
1 2 Channel no-name RCAs (USED) pending
1 4 Channel Rockford RCAs Dual Twist (ROCCPDT46)(USED)
20 Feet of remote turn on wire (proably like 14 gauge)(USED)
20 Feet 8 Gauge wire (USED) pending
Alot of speaker wire (USED)

Subwoofer Specs:

* Optimized for Maximum Sound Quality / SPL
* PHAT 2” Foam Surround
* 120 oz. Magnet
* Non-Pressed, Non-Transfer Paper Cone
* KM3 Coated Cone for Low Cone Distortion
* Flame-Designed Cast Flame Basket
* High-Temp 2.5" ASV Voice Coil Former
* Multi-Connect Lug-Lock Terminals
* Mounting Depth: 7 1/8”
* Hole Cutout: 14”
* Outer Diameter: 15 1/2”
* Size: 15 inch
* Rec. Sealed Box Dims: 1.25 - 3.25 cu.ft.
* Rec. Ported Box Dims: 1.65 - 3.7 cu.ft
* Free Air Usage: not recommended
* Sensitivity: 94 dB
* Frequency Response: 22-700 Hz
* Recommended RMS Power: 650W
* Peak Power Handling: 1300W
* Impedance: 4 ohms subwoofer wiring options

Sub Box Specs:

» Type 2 hatchback style enclosure for one 15" subwoofer
» 5/8" medium density fiberboard construction with gray carpet covering — additional 3/4" front panel supports woofer
» nickel-plated, spring-post speaker terminals
» optional interchangeable baffles accommodate non-round subwoofers
» QXs mounting ring
» internal volume: 2.25 cubic feet
» dimensions: 26-1/2"W x 17-1/2"H x 17"D1 x 12"D2

Amplifier Specs:

* Class A/B MOSFET Circuitry
* PWM MOSFET Power Supply
* Semi-Double Sided Glass Epoxy Circuit Board
* Variable 18 dB Low-Pass & High-Pass Crossovers
* Variable Subsonic Filter
* Switchable 18 dB Bass Boost at 45 Hz
* 3-Way Protection Circuitry
* Cobalt Blue Illumination
* High Gloss Chrome-Plated Finish
* Nickel-Plated Block Terminals
* Air Induction Fan Cooled
* Preamp Outputs
* Optional Remote Voltage Monitoring
* Optional Remote Bass Boost Control

Multi-Channel Amp Specifications

* Amplifier Type: Multi-Channel
* RMS Power @ 4 Ohms: 50W x 4
* THD at 4-Ohm RMS Power: 0.02%
* Bridged RMS Power @ 4 Ohms: 200W x 2
* Speaker Level Inputs: no
* Preamp Outputs: yes
* Built-In Crossovers: HP/LP
* Bass Boost: 0 or 18 dB
* Frequency Response: 10-40,000 Hz
* Signal to Noise Ratio: > 100 dB
* Fuse Rating: 2 x 30 amps


Specs for distribution block:

Lighting Audio Bolt Series features solid machined brass construction with hard gold plating for reliable connectivity. The BD3 is ideal for connecting amplifiers and fused distribution blocks. It feature a clear base and snap-off cover with etched logo. The BD3 accepts two 0/1 gauge inputs and three 4 gauge outputs.

[Nors]

Bump email/pm any offers or for pictures.

[Nors]

Bump, 65 for the amp and 4 channel RCAs picked up.

[Nors]

Sub and box $150 picked up.
4 Channel Amp + 4 Channel RCAs $65 picked up