FS: OBD2a and OBD2b to OBD1 conversion harnesses.
03-10-2005, 08:08 AM
#1
1.5L boost whore
Thread Starter
Join Date: Mar 2005
Location: Charlton
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
FS: OBD2a and OBD2b to OBD1 conversion harnesses.
$75 + shipping from 01507. Charlton, MA
This lets you use a 92-95 OBD1 ecu (P28 sohc vtec) into 96-00 Civics, Integras, Preludes, Accords, and CRVs. This is a must have for a Honda/Acura owner who wants to use a chipped OBD1 ECU.
You can also use this if you swap an OBD2a/OBD2b motor and wiring harness into your OBD1 car. perfect for those B series swaps into 92-95 Civic hatchbacks.
NOTE: Wires and connectors in the harness may be different colors than pictured. This WAS an actual harness I made.
if you need details, PM me here or email me at chrisswebdesign@verizon.net
If you need references, im on www.HondaSwap.com as TurboMirage, www.Mirageforums.net as red93mirage, and www.4g61t.org as red91colt.
This lets you use a 92-95 OBD1 ecu (P28 sohc vtec) into 96-00 Civics, Integras, Preludes, Accords, and CRVs. This is a must have for a Honda/Acura owner who wants to use a chipped OBD1 ECU.
You can also use this if you swap an OBD2a/OBD2b motor and wiring harness into your OBD1 car. perfect for those B series swaps into 92-95 Civic hatchbacks.
NOTE: Wires and connectors in the harness may be different colors than pictured. This WAS an actual harness I made.
if you need details, PM me here or email me at chrisswebdesign@verizon.net
If you need references, im on www.HondaSwap.com as TurboMirage, www.Mirageforums.net as red93mirage, and www.4g61t.org as red91colt.
03-10-2005, 08:19 AM
#2
Life after death
Join Date: Jun 2003
Location: In a place called Hell
Posts: 2,780
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in a conversion harness and I was wondering if anyone could answer my question.
I have a 2000 Integra LS. (OBDIIb)
How do you bypass the factory immobilizer?
If I were to swap my ECU with a conversion harness would I be straight. Do I need to have an extra Acura ignition key without the chip in it? How do I make this work?
I have a 2000 Integra LS. (OBDIIb)
How do you bypass the factory immobilizer?
If I were to swap my ECU with a conversion harness would I be straight. Do I need to have an extra Acura ignition key without the chip in it? How do I make this work?
03-10-2005, 08:55 AM
#3
1.5L boost whore
Thread Starter
Join Date: Mar 2005
Location: Charlton
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
the immobilizer has an external module but will be inactive if you use an OBD1 ECU. you can use your original key.
if you need an ECU as well, I can do $240 shipped for an ECU with any program on the chip, Full Throttle Launch, and Check Engine Light shift.
if you need an ECU as well, I can do $240 shipped for an ECU with any program on the chip, Full Throttle Launch, and Check Engine Light shift.
