Fully Built B18C1 Swap $3500
02-24-2005, 11:16 AM
#1
Member
Thread Starter
Join Date: Feb 2005
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Fully Built B18C1 Swap $3500
2001 GSR B18C1 Engine and Tranny
(Block)
GE 84.5mm Sleeves
APR Headbolts
Wiseco Endyn Pistons and rings
Eagle Rods
ACL Bearings
Balanced and knife edged crank
Type-R Oil pump
(Head) cost me $1700 for all the parts and labor alone
5 Angle Valve job
Full Race Port&Polish
Ferrea .5mm Oversize valves
Ferrea Valve Springs and Retainers
Endyn Port and Polish
Venom Cam Gears
Type-R Valve Cover
(Tranny)
Act Prolite Flywheel 8.8lb
Action 2KS Clutch
JDM Type-R LSD
Everything has 7,200 miles since new
210 psi across all 4 cylinders
Never beat on at all. This was my baby no part was overlooked
Runs perfect zero smoke under boost or under deceleration
I have pics available upon request swap is ready to go
Cell (607) 237-6289 or widebodycrxsi@yahoo.com
$3500
(Block)
GE 84.5mm Sleeves
APR Headbolts
Wiseco Endyn Pistons and rings
Eagle Rods
ACL Bearings
Balanced and knife edged crank
Type-R Oil pump
(Head) cost me $1700 for all the parts and labor alone
5 Angle Valve job
Full Race Port&Polish
Ferrea .5mm Oversize valves
Ferrea Valve Springs and Retainers
Endyn Port and Polish
Venom Cam Gears
Type-R Valve Cover
(Tranny)
Act Prolite Flywheel 8.8lb
Action 2KS Clutch
JDM Type-R LSD
Everything has 7,200 miles since new
210 psi across all 4 cylinders
Never beat on at all. This was my baby no part was overlooked
Runs perfect zero smoke under boost or under deceleration
I have pics available upon request swap is ready to go
Cell (607) 237-6289 or widebodycrxsi@yahoo.com
$3500
