FS: "new" 6000K Low & High Beam H4 PorLumen HID kit
02-03-2005, 09:39 AM
#1
Member
Thread Starter
Join Date: Jun 2002
Location: San Francisco, CALI.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
FS: "new" 6000K Low & High Beam H4 PorLumen HID kit
" New "
6000K
ProLumen H4 Dual Low Beam & High Beam
High Intensity Discharge (H.I.D.) Kit
Includes:
2 ballasts,
2 HID bulbs with built in dual beam motor,
2 ballast mounting brackets
Wiring,
Relay and fuses for the dual beam feature,
Original boxes,
Instructions,
Zip-Ties & Screws & Fuses
Retails $ 475
~~ Fits: 92+ Honda Civic, Toyota Tacoma, Toyota Mr2 w/ H4 conversion lenses, Mazda Miata w/ H4 conversion lenses, Toyota Camry, Toyota Terel, Scion, etc.
$ 380 OBO
Installation available as additional buyer's expense
Located in: San Francisco, California
email: nite_boy@hotmail.com
MORE PICTURES:
6000K
ProLumen H4 Dual Low Beam & High Beam
High Intensity Discharge (H.I.D.) Kit
Includes:
2 ballasts,
2 HID bulbs with built in dual beam motor,
2 ballast mounting brackets
Wiring,
Relay and fuses for the dual beam feature,
Original boxes,
Instructions,
Zip-Ties & Screws & Fuses
Retails $ 475
~~ Fits: 92+ Honda Civic, Toyota Tacoma, Toyota Mr2 w/ H4 conversion lenses, Mazda Miata w/ H4 conversion lenses, Toyota Camry, Toyota Terel, Scion, etc.
$ 380 OBO
Installation available as additional buyer's expense
Located in: San Francisco, California
email: nite_boy@hotmail.com
MORE PICTURES:
02-03-2005, 09:50 AM
#3
Member
Thread Starter
Join Date: Jun 2002
Location: San Francisco, CALI.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
ATTN: " westcoaststyle "
I already have two HID kits in each of my cars.
It was gift from a group of friends for Bday.
I decided to sell these and not go through the trouble of removing my old and installing these. If I did not have HIDs, I'd install these.
h: 
It was gift from a group of friends for Bday.
I decided to sell these and not go through the trouble of removing my old and installing these. If I did not have HIDs, I'd install these.
h:
Originally Posted by westcoaststyle
Why are you selling these? No shields/cutoffs?
02-03-2005, 09:59 AM
#5
Member
Thread Starter
Join Date: Jun 2002
Location: San Francisco, CALI.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Attn: " westcoaststyle "
Retail is crazy.
I'm selling them well under.
If you are interested, we can chat/talk.
As I am willing to negotiate a bit, but not jab in the nutz, hehe.
Drop an email: nite_boy@hotmail.com
I'm selling them well under.
If you are interested, we can chat/talk.
As I am willing to negotiate a bit, but not jab in the nutz, hehe.
Drop an email: nite_boy@hotmail.com
02-03-2005, 03:19 PM
#7
Member
Thread Starter
Join Date: Jun 2002
Location: San Francisco, CALI.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Attn: " H22cord "
An ad is an ad.
Thanks for the info.
Make sure your friend's is a DUAL Low beam and High beam.
As the H4 are Dual function in cars.
Single low beam H4 HID kits go for $300-$325.
I know the market as well.
Prices depends on condition and brand and reliability etc.
Thanks for the info.
Make sure your friend's is a DUAL Low beam and High beam.
As the H4 are Dual function in cars.
Single low beam H4 HID kits go for $300-$325.
I know the market as well.
Prices depends on condition and brand and reliability etc.
02-08-2005, 09:28 PM
#9
Member
Thread Starter
Join Date: Jun 2002
Location: San Francisco, CALI.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Attn: " EJ6Ferio "
Thanks for the INPUT " EJ6Ferio "
Here's some HID education bro:
HID bulbs: D2R & D2S
D2R = Reflective Headlight housing (H4 or H7)
D2S = Projector Headlight Housing (H1, 9006)
D2R have a copper'ish film pattern on 10% of the HID bulb.
(i.e. Seen in PICTURE 4 of the this AD.)
Some H4 HID kits have D2S bulbs with that shield you are talking about to make that D2R effect.
Those companies buy probably only D2S bulbs for their kits.
ProLumen has both D2S and D2R bulbs for whatever type of applications (9006, H4, H3, 9004, etc).
So lacking the H4 shield does not constitute as a bad product.
It only shows you how the company uses it's resources.
Xtec uses D2S bulbs with a shield for the H4 kits.
ProLumen uses D2R bulbs without a shield.
Same effect.
If you want another example:
OEM Acura TL uses D2R Osram bulbs in their cars' Reflective Headlight Housing.
It's because the D2R Oram HID bulbs have that factory film on 10% of the bulb.
Do your research and then educate us.
No need to jump in with a cheap shot.
This is an ad.
Not a polling spot for bad mouth.
Check with the Moderator on guidelines.
We're all adults here.
PEACE on earth... it's a freakin new year!!h:
Here's some HID education bro:
HID bulbs: D2R & D2S
D2R = Reflective Headlight housing (H4 or H7)
D2S = Projector Headlight Housing (H1, 9006)
D2R have a copper'ish film pattern on 10% of the HID bulb.
(i.e. Seen in PICTURE 4 of the this AD.)
Some H4 HID kits have D2S bulbs with that shield you are talking about to make that D2R effect.
Those companies buy probably only D2S bulbs for their kits.
ProLumen has both D2S and D2R bulbs for whatever type of applications (9006, H4, H3, 9004, etc).
So lacking the H4 shield does not constitute as a bad product.
It only shows you how the company uses it's resources.
Xtec uses D2S bulbs with a shield for the H4 kits.
ProLumen uses D2R bulbs without a shield.
Same effect.
If you want another example:
OEM Acura TL uses D2R Osram bulbs in their cars' Reflective Headlight Housing.
It's because the D2R Oram HID bulbs have that factory film on 10% of the bulb.
Do your research and then educate us.
No need to jump in with a cheap shot.
This is an ad.
Not a polling spot for bad mouth.
Check with the Moderator on guidelines.
We're all adults here.
PEACE on earth... it's a freakin new year!!
h:
Originally Posted by EJ6Ferio
OEM own crappy China made product...plus no glare shield... you'll be blinding the f out of everyone... no light to ground
02-08-2005, 09:37 PM
#10
Registered User
Join Date: Jan 2004
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
yea i know ... i do retros and used to work for HID company... Civic's and H4/9007 housing is not made for HIDS
if you see the housing it's way differ from hid housing and non... either way.. good luck on selling it
if you see the housing it's way differ from hid housing and non... either way.. good luck on selling it