Precision SC63 Turbo, Manifold, Downpipe
10-21-2003, 09:22 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Precision SC63 Turbo, Manifold, Downpipe
Top of the line T3/T4 turbocharger used less than 1000 miles. Made by Precision Turbo & Engine; sells for $960 new.
Also available:
- SFP tubular manifold that was around $500 new.
- 2.625" mandrel bent downpipe that was $200 new.
- Custom 3" intake pipe to fit behind the front fog light on 1996-2001 Integra that was $100 new.
SPECIFICATIONS:
700hp; 32 lbs. boost at 68 lbs./minute;
.69 compressor housing;
.63 turbine housing;
2.75" p-trim wheel;
63mm compressor wheel;
SFP tubular exhaust manifold with a 40mm flange mounted;
2.625" mandrel bent downpipe;
All exhaust parts are jet-hot (thermal) coated except for the compressor housing.
Will fit on a B-series motor.
No fan/radiator modifications needed for Integra applications (not sure on Civic).
$1500 or best offer. Can pay by credit card with PayPal.
Also available:
- SFP tubular manifold that was around $500 new.
- 2.625" mandrel bent downpipe that was $200 new.
- Custom 3" intake pipe to fit behind the front fog light on 1996-2001 Integra that was $100 new.
SPECIFICATIONS:
700hp; 32 lbs. boost at 68 lbs./minute;
.69 compressor housing;
.63 turbine housing;
2.75" p-trim wheel;
63mm compressor wheel;
SFP tubular exhaust manifold with a 40mm flange mounted;
2.625" mandrel bent downpipe;
All exhaust parts are jet-hot (thermal) coated except for the compressor housing.
Will fit on a B-series motor.
No fan/radiator modifications needed for Integra applications (not sure on Civic).
$1500 or best offer. Can pay by credit card with PayPal.
