Results 1 to 4 of 4

Thread: 1991 integra Ls

  1. #1
    Junior Member
    Join Date
    Aug 2006
    Posts
    4

    1991 integra Ls

    Need help with front wheel bearing, What is the best way to change the bearings on my car? I have 365000 km on it and the bearings just started to make a grinding sound, The car has been in the famaliy since new

  2. #2
    Registered User
    Join Date
    Aug 2005
    Posts
    642
    theres a kit they sell on ebay for 150 bucks i believe where you dont have to remove the whole knuckle.

    or you could take the knuckle apart and bring it to a shop and have them press it out and put in the new bearing.


    do the math which ever saves you time and money.

  3. #3
    Junior Member
    Join Date
    Aug 2006
    Posts
    4

    wheel bearing

    changed the wheel bearings and all is good payed 70 each and did the job in 2 hours but now have a problem with the head lights, when its cold out the light take time to come on, what could the be?

  4. #4
    Registered User
    Join Date
    Aug 2005
    Posts
    642
    bad ground for headlights, corroded connector (moisture at connectors) , or its just the bulb f#ckin up.

  5. #4
    Honda-Acura
    Honda S2000

    Honda-Acura

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.

Search Engine Friendly URLs by vBSEO 3.5.2