Notices

1990 Integra GS idleing problem

Thread Tools
 
Old 07-21-2008, 10:49 AM
  #1  
Andy_P
Junior Member
Thread Starter
 
Andy_P's Avatar
 
Join Date: Mar 2008
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 1990 Integra GS idleing problem

hi there, first off admins forgive me if this is in the wrong spot, ok i hav a 1990 Integra GS and when i start the car it runs fine for about 3 seconds and then i'll get this werid reving and i'll rev up and down until i shift the car into gear and then it'll stop but as soon as i shift back to park it'll start again and it's affecting my car's stereo's system too so i'm guessing electrical now some people told me to replace the rad cap and i kinda found that werid but i tried it and that did nothing so please help me someone! any help is greatly appreciated
Old 08-02-2008, 12:59 PM
  #2  
g290ls
they call me tater salad
 
g290ls's Avatar
 
Join Date: Mar 2006
Location: salt lake city, ut
Posts: 683
Likes: 0
Received 0 Likes on 0 Posts
Default

i have the same problem with mine and i have been told a few things
1. vac leak which i think mine is
2. the throttle cable is too tight
3. might be a sensor of some sort

mine is from the cc line possibly so best thing to do is dick around with it and try and source the problem
Old 08-02-2008, 05:00 PM
  #3  
A-series
v-card member alpha
 
A-series's Avatar
 
Join Date: Oct 2006
Location: Assplosion, NE
Posts: 4,010
Likes: 0
Received 0 Likes on 0 Posts
Default

Chances are it's either the FITV (fast idle thermo valve) or the EACV (electronic air-control valve a.k.a. IACV). Both are easy to remove and either clean (for EACV) or tighten (FITV). If you don't have a service manual, do a search and you'll find a walk-through somewhere.
Old 08-05-2008, 09:55 AM
  #4  
g290ls
they call me tater salad
 
g290ls's Avatar
 
Join Date: Mar 2006
Location: salt lake city, ut
Posts: 683
Likes: 0
Received 0 Likes on 0 Posts
Default

^^^i might have to look at those thanks




All times are GMT -8. The time now is 06:21 PM.