i have 17s and just installed lowering springs
#1
i have 17s and just installed lowering springs
i have 17s and 205s and i just installed h&r race springs on kyb agx shocks/struts and now my front tires rub fender wells when i turn corners but everything else is fine is there anything i can do and agxs have 4 settings the front is set on 1 and the rear is set on 3 i think 3 is supposed to be stiffer
help plz
help plz
#5
dam dude thats gay i dont have the money to do that and wont that just lower the car more will there really be enough clearance and it only rubs on plastic inner fender i though maybe i could take it off and get by it only rubs when turning and only front tires
#6
got boost?
Join Date: Jan 2005
Location: somewhere
Posts: 2,346
Likes: 0
Received 0 Likes
on
0 Posts
first try to bring your camber in more ( u will go through tires,and have the butterfly effect, and won't handle as good), If that dosen't help u can take a big fucking hammer (ghetto way) and pull off your fender lining, and u will see metal that sticks out smack it, so it becomes flat.. basically roll the outer fender, and teh inner middle portion is what u are going to be rollin to accomdate those wheels
#7
Apathy Kills
What sidewall profile are you running? 205/40/17?
My bet is that your rolling circumference is a tad larger than stock, which is causing you to rub when the suspension is under load.
My bet is that your rolling circumference is a tad larger than stock, which is causing you to rub when the suspension is under load.
__________________
:: :ToDspin: - supermod - but who gives a shit?
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
:: HAN Integra FAQ: If, by some miracle, yours hasn't been stolen... check it out!
#8
www.ufc.com
Join Date: Sep 2004
Location: Irvine CA
Posts: 2,920
Likes: 0
Received 0 Likes
on
0 Posts
Is the offset for your car? I had that happen once when I had a set of 17 inch tenzo sinko r's w/205-40-17 on my 2 inch drop w/a camber kit. The deal was on a trade and the lug pattern was 4x100 so it fit, but I think the offset was wrong since it rubbed on u-turns. Later on down the line I had a set of 17 inch rev m-6 w/205-40-17 and those were new. Prior to the order the guy I spoke w/asked specifics on my yr. make and model in-order to avoid rubbing issues. Well, those wheels never rubbed.
#9
www.ufc.com
Join Date: Sep 2004
Location: Irvine CA
Posts: 2,920
Likes: 0
Received 0 Likes
on
0 Posts
first try to bring your camber in more ( u will go through tires,and have the butterfly effect, and won't handle as good), If that dosen't help u can take a big fucking hammer (ghetto way) and pull off your fender lining, and u will see metal that sticks out smack it, so it becomes flat.. basically roll the outer fender, and teh inner middle portion is what u are going to be rollin to accomdate those wheels
#10
yeah they are 205/40/17 84w and what do u mean by offset im not sure what brand wheels are and the springs give 2" drop but thanks for info any more if possible i might just use good ol american enginuvity lol