starting problem
09-28-2003, 02:16 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Phx AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
starting problem
i just recently put a b16a1 1st gen in to my 89 hatch it ran good for a week then it started to bogg out so i took it in and they said i needed a new dist. so i bought a new one it's been running good for 1month after till sat afternoon i was driving then i just died and didnt want to start again so i had it towed to my house it cooled for bout 3 hrs then started right up.. then drove it for a while then died again i thought it could be the dist. so i put my old one back on and it still didnt start can someone help me out here
09-30-2003, 03:59 PM
#3
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Phx AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
no it doesnt over heat.... its running now i dont know i took the plugs out and re-gapped them and its started and its running good but when i started to run good i had a leak under one of my injectors but its all done now works coo