Results 1 to 5 of 5

Thread: 88 Integra LS

  1. #1
    rebuilding
    Join Date
    Jul 2003
    Location
    Pittsburgh, PA
    Posts
    175

    88 Integra LS

    Is it possible to do a LS/Vtec swap on the 1.6 out of an 88 integra LS?

  2. #2
    Senior Member jlicrx's Avatar
    Join Date
    Sep 2002
    Location
    Colorado Springs
    Posts
    548
    no - can't put B-series head on D-series block
    ZCspeed Racing

  3. #3
    rebuilding
    Join Date
    Jul 2003
    Location
    Pittsburgh, PA
    Posts
    175
    Is this engine considered the zc engine?

  4. #4
    Rotorphile. Kai's Avatar
    Join Date
    Mar 2002
    Location
    Richmond, VA
    Posts
    10,120
    No. It is a D16A1, it is a DOHC ZC pattern engine, but is not nearly as powerful.

    Most Browntop ZC parts (pistons, cams, cylinder head, etc) can be swapped in with no problems.

    It is possible to mount an LS/VTEC into this car, but the mount kit is very expensive.

  5. #5
    DH-Racing.com has a head rework that allows the install of LS valvetrain. I think its about 500$ but dont quote me on that.
    98 Civic Si
    87 Integra LS
    85 Supra
    All Stock... gotta lotta work to do

  6. #5
    Honda-Acura
    Honda S2000

    Honda-Acura

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.

Search Engine Friendly URLs by vBSEO 3.5.2