I bought a JDM EJ22T for ASAP motors out of Houston Texas on 1/5/06. The motor isn't on it's way, I keep getting hung up on when I call them.
Looks like they're registered on rip-offs.com and they've had past customers file complaints at the BBB.... stupid me, I should've researched them first.
Geo Metro Type-R
JDM 3-1 header
JDM Type-R Emblem conversion
Bling bling hubcaps
I bought my 1991 b16a in 2001 from Metric Motors. I actually bought it through Landspeed racing. The valve cover looked rough, but the engine runs strong. One week after the install, which is in a 1991 civic hatch, it ran a 14.7 @ 94 mph. The engine came with cable tranny (non LSD), and a Zdyne ECU. The civic had everything stripped out of it. Including the sound deadening tar on the floor. One seat and a dashboard. The car had a powercore header, homemade intake, and stock exhaust, which blew that night. Everything shipped was 1300.00. The car had 1 1/2 years off since then, but runs the same. I would recommend them anyday.
I figured I should edit this post, because I can't find landspeed racing on the web anymore. In that year and a half off, things have changed.
Last edited by S2Heaven; 02-13-06 at 01:04 AM.
b18c from hmotorsonline from steve. personally went there to pick it up. looks great but its not in yet so i dont know how it performs yet. very prefessional and helpful.
got my b16 from kress used auto parts/ harrys u pull it. bought the whole 99 si with 43,000 on the cluster for 4gs i think i did good their web site is wegotused.com i know their u pull it yard is the largest in the country.
i jacked mine i tied the car behind my truck and stole it from the delership
I went to Nippon-Motors.com. Some guy named Robert helped me out with selecting my front clip. They have a lot of front clips in very good condition. I was able to get a lot of parts off of my front clip. I was even thinking of converting my civic right hand drive but too much work. The fenders were in good condition. I also got a japanese license plate, japanese coins (under the carpet), LSD tranny, etc. Robert turned on the engine on a couple of front clips with fluid starter. I recommend them big time.
I got a 1999 Integra ls engine for 535.00 from a salvage yard here in North Carolina. The engine has 96,000 miles on it and looks brand new, now I just need to get it into my 90 integra
I bought my 96 h22a1 from www.motorworks.com of ny... i ordered it and it came in practically mint condition..a little expensive..i paid roughly $2,400. Motor has under 45,000 miles on it. If i had to buy again i would use them. i'm having www.trickengineering.com of nh drop the motor in.Should be complete in just a few weeks. Motor is going into a 92 civic hatch.
Last edited by 92CivicPrelude; 01-18-07 at 04:32 PM.
Rachel Bilson <3
Makoto Auto Parts
Chefboiali will vouch as well if he hasn't already
FREE SHIPPING!!! FTW
B18C Sir-G for $1800 from Hmotors, went and picked it up in person. Looks new. Mario was great help.
anyone know anything about these guys?
got a B18B from hmotorsonline..motor was super clean, packaged very well, but my axles were in horrible condition..but i'm not complaining; i was supposed to get a gs-r tranny but what they didn't know is it had a type-r final drive
i <3 jdm
got my b18b from there, these guys are amazing! the valve cover on the motor had a small gouge in it, so they sent a new valve cover to!
www.jdmsource.ca buddy and i got ours here they were clean and great nothing wrong. both motors were B16 90-91 civic SIR kits mine was sent out with extra stuff complete wiring jdm civic. axles, and shift link. buddy same but with a PWO Spoon ECU it was sweet rev on it was past 9000 no joke! Vtec was like 4300 ( I will buy more from them there very nice helpfull on the phone very great price on the motor kits and motors shiping was great as well .
Last edited by cvccb16; 04-25-07 at 03:03 AM.
I got mine form Jazz Pro Parts.com an Ls long block. The motor was super clean no damage all sensors none broken. Even came with the starter and all the Trans bolts and driver side motor mount. That is all that was good about this experience. Their web site said includes distributor but there was no distributor. Iíve been fighting with them for 10 weeks now to get what is owed to me and it still hasnít happened. They keep pointing fingers at one another and no one is taking action to get me a distributor. So yesterday I reported them to the Better Business Buru.
ew n!gg@ u g@y
technically ebay but i got it through LKQ online in the bronx aka Hunt's Point
flipped cracka: the first time i remember touching any was way before that. i was probably 10 or so and my dad, his girlfriend (denise), and i were asleep on our couch (atleast i was pretending to be asleep) and i slipped my hand up her shirt. they were pretty small though.
Xbox Gamer Tag: Omie319
Jimmy John's Driver
What year and model did that come out of, I've never heard of Sir-G, but am interested in such a low priced b18c in general
Originally Posted by jesusublime99
'93 Civic Si Hatch - Wrecked
'96 Integra LS -
Sir-G is the japanese equivalent to the GSR, i believe. And 1800 is for the longblock only. I've bought 2 h22a's, one b18b, and one ZC longblock from hmotorsonline.com. Never had a problem with any of them. Always clean, always ran good on startup. Good customer service as well.
1991 Red Honda CRX HF - Dohc Zc With some stuff
1994 Acura Integra LS - Daily beater
The know nothing kid.
anyone know a good place in Tucson, Arizona. I plan on doing a swap after this engine goes out on me, only at 84000 in a 99, so i have a ways to go haha
this place sux
I am not usually one to dis people, however, this has to be said.
Originally I wanted to put a zc into my rex. The guy at WCP (you know who you are), said no problem. For $750, it seemed pretty good. After almost 6 months and no engine I was getting pissed off So I called and he said it was port security that was holding up the engine. O.K.
I informed him that it had to be a black top to fit, he said it would take longer to get because they were "rare". First off he didn't know what would work? Second, he couldn't tell me how long it would take?
I told him I wanted to cancel the order. He then informed me it would cost me a 20% restock fee. I asked myself for what?
Eventually he informed me he could get me a jdm 1st generation b16 for just a bit more. O.K. It was the engine I really wanted anyway. He didn't tell me the other stuff usually included in an engine swap package, would be a lot more.
After another long stretch, the b16 finally came to my friends shop. I was going to rebuild it before I installed it. Tore it apart, and it was filled with water.
After the rebuild it is now a good looking engine.
I had to get motor mounts, shift linkage, and the VTEC wiring from Hasport. Those guys are knowledgeable and helpful.
Long story, short. Don't buy from WCP. Look 'em up on the web, be forewarned.
1991 CIVIC SI
I got my stock replacement from hmotorsonline and it sat 4 like 3 months than I put it in it has a knock in it like a lifter or some shit and they won't repalce it cuz they have a 30 day starty up warnty
Anyone here ever brought an engine from http://www.torontojdm.com/lite/cart.php
It seem like this only place i can buy engine in ONtario, Canada.. Need more info please...
I got a HMO b18c. Great motor 33,000 miles very healthy i made 350hp[IMG]x[/IMG] on 10 psi with 750cc RC injectors.
Last edited by boostedJDMHatch; 01-03-12 at 07:13 AM.
how much would it cost if you buy from junk yard?
Originally Posted by LSVTECKING
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Search Engine Friendly URLs by vBSEO