Cam Timing Differences with D18Z6/Y8
Does anyone know the timing differences between the D16Z6 and D16Y8 engines? I acquired a Zex cam for a D16Z6 and want to put it into my D16Y8. All of the specs (lift, duration, etc) are the same between the 2 cams Zex sells for my application and the Z6. I called Zex to make sure this swap was acceptable and the rep told me it was fine, and all I would need was an adjustable cam gear and to advance the timing, but he couldn't tell me how much. Any help would be much appreciated.
I would suggest degreeing the cam in as the best method but I know most people don't want to go through that ordeal
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Search Engine Friendly URLs by vBSEO