Results 1 to 8 of 8

Thread: installing injectors;have question

  1. #1
    Junior Member t3t4delsol's Avatar
    Join Date
    Feb 2006
    Location
    york pa
    Posts
    365

    installing injectors;have question

    i dont have my car tuned yet and i was wondering if i install my 440 injectors before the tune will i get more fuel out of them or will the flow be the same as stock,

  2. #2
    On permanent hiatus
    Join Date
    Jul 2004
    Location
    A forum with actual tech
    Posts
    9,716
    They are too large to be running on stock fuel maps. The same injector pulse from the ECU will make those injectors flow way too much fuel to drive it. Wait until you get to the dyno and have them installed...or have a basemap chip made and drive with that to the dyno.

  3. #3
    Junior Member t3t4delsol's Avatar
    Join Date
    Feb 2006
    Location
    york pa
    Posts
    365
    even if im running a larger turbo? at 9lbs

  4. #4
    Senior Member AcuraFanatic's Avatar
    Join Date
    Mar 2000
    Location
    Southern NH
    Posts
    37,273
    Quote Originally Posted by Däs Schmoo
    They are too large to be running on stock fuel maps. The same injector pulse from the ECU will make those injectors flow way too much fuel to drive it. Wait until you get to the dyno and have them installed...or have a basemap chip made and drive with that to the dyno.
    Werd. And this reason, my friends, is why you see so many turbo cars running insanely rich
    '04 Civic EX Coupe :::: Cusco, CCW, T1R, ASR, Wilwood, Hotchkis, etc.
    '92 Accord EX-L Sedan :::: JDM H22A AT->MT Swapped California Shelled Sleeper
    '76 Accord Hatchback ::: 70,174 miles, Restomod Project, H22A Swap Dreams

  5. #5
    I <3 Boost dubcac's Avatar
    Join Date
    Jan 2001
    Location
    Westside til I die
    Posts
    56,394
    Trailer it to the dyno. Don't even think about driving it without a tune.
    2011 WR Blue Mica Subaru Impreza WRX - AEM.CobbTuning.FastMotorsports.Grimmspeed.Invidia.Kartb oy.MR.TorquedPerformance.WorkSuperWheels
    Team B.O.B.® - Ballaz on a Budget

  6. #6
    Boo Boo Kitty F*#k
    Join Date
    Oct 2004
    Location
    Vienna WV
    Posts
    643
    Even with the turbo you will blow it up. get it tuned.
    91 CRX Si JRSC
    Turboedit ECU
    http://www.cardomain.com/ride/560256
    Quote Originally Posted by MarshyTheKid
    I used to like little boys but now Im into young men

  7. #7
    Still Water FooD2000's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    1,232
    like already stated above. Buy a chipped ecu from *Xenocron* (spelling?), Have him put a basemap for your application. Then you can drive to the dyno.

    *edited* here's a Sexy Link: http://www.xenocron.com/products.php?page=chipped-ecu
    ^ you can find wiring harnesses, wideband kits, everything.
    Last edited by FooD2000; 06-20-06 at 12:08 AM.
    Team-Maintence.

  8. #8
    On permanent hiatus
    Join Date
    Jul 2004
    Location
    A forum with actual tech
    Posts
    9,716
    Quote Originally Posted by FooD2000
    like already stated above. Buy a chipped ecu from Xenocron. Have him put a basemap for your application. Then you can drive to the dyno.
    Fixed.

  9. #8
    Honda-Acura
    Honda S2000

    Honda-Acura

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.

Search Engine Friendly URLs by vBSEO 3.5.2