Compression for boost
11-14-2004, 10:16 AM
Registered User
Thread Starter
Join Date: Oct 2004
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Compression for boost
I have a B20A and was wondering what stock compression is. I also want to know if when I add 8-12 psi if i could use stock "size" pistons, aka, would have the same compression as stock just forged.
11-14-2004, 10:41 AM
Senior Member
Join Date: Nov 2003
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
compression isn't the only thing you have to look at....the B20A has a crap head design so you have to look at the chamber shape and squench
11-14-2004, 11:25 AM
İŞŘs!
Join Date: Nov 2004
Location: Greenville, South Carolina
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
You can keep the stock C/R, which is 8.8:1, with aftermarket pistons.
11-14-2004, 01:01 PM
Registered User
Thread Starter
Join Date: Oct 2004
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts