![]() |
|
|||||||
| Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#31 | |||||||
|
Junior Member
Join Date: Oct 2007
Location: Canada, Edmonton
Posts: 2
|
|
|||||||
|
|
|
| Sponsored Links | ||
|
|
|
#32 |
|
Junior Member
Join Date: Oct 2007
Location: Calgary
Posts: 19
|
was the harness you jumped yellow?
Don't mess with those yellow connectors. If you pull the wrong one while your head is beside the dash sideways the airbag could snap your neck. most of them them (airbag systems) are pretty idiot proof nowadays, and i would expect that Honda would be making the best ones. So thats probably why nothing happened. You need the blue connector. |
|
|
|
|
|
#33 | |
|
Junior Member
Join Date: Oct 2007
Location: Canada, Edmonton
Posts: 2
|
Quote:
|
|
|
|
|
|
|
#34 |
|
Junior Member
Join Date: Oct 2007
Posts: 1
|
i couldn't find a green/blue 2pin on the pass side of my 2000 accord...
there's a grey 2-pin, though i see a large green "box" behind the glove box, but it's far enough up there that i'd need to completely remove the kick panel and glove box to access... the grey plug i can see is just a few inches from the kickpanel and wall, about 2-3 inches up... one half is anchored to the car itself. i know i'm doing a crappy job explaining this, if yo want pics, let me know |
|
|
|
|
|
#35 | |
|
Junior Member
Join Date: Nov 2007
Posts: 2
|
Quote:
|
|
|
|
|
|
|
#36 |
|
Junior Member
Join Date: Nov 2007
Posts: 3
|
same problem for me, please help
99 accord ex cyl. sorry if i hijacked the thread but i'm desperate.
looked under and behind the glove box and find no connector. just disconnected the negative battery cable for 2min to reset. but hoping anyone could locate where the connector would be so i could do this test. thx, haid |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|