|
4th Gen MUGEN FRONT LIP DIY!!!
Tools: Sockets, wrenches, philips screw driver, dremel with cutting bit, Haynes Manual, other things that i cant think of.
Step 1: Take bumper off
Step 2: Take bumper and lip to a nice place to work on with lighting and power outlets. I took mine into the basement.
Step 3: Cut off ALL tabs off the lip.
Step 4: Mount Lip on bumper by holding lip in place and using something to mark where to drill holes. While doing this, mark the edges so u can cut the excess length. Use a dremel or hax saw to cut it or anything else.
Here's a pic of the bending:
Step 5: After marking holes, take a drill with the proper size drill bit and drill the holes.
Step 6: Put lip back on the bumper and put the bolts, washers and nuts in place.
Step 7: Tighten all the bolts and make sure they're all in place.
Step 8: Put bumper back on. Be carefull not to drop the bumper. Finish product should look like this:
GOODLUCK!!!
|
|
|
__________________
1992 Honda Civic CX Hatch
Championship White
D16z6 Head & SOHC ZC Block
AEM V2 CAI, 4-2-1 Header, 2.25" Magnaflow Catback
Tokico Illumina/Dropzone Coilovers 350f/450r
GSR 14mm Rear Sway Bar
Megan Rear LCA
|
03-05-03, 11:42 PM
Threaded Mode