How to install filter mounted fuel pressure gauge

[lkailburn]

This is permanantly hosted on my site at: www.lukekailburn.com How to install a fuel filter mounted Fuel pressure Gauge The parts -Teflon wrap the guage threads, and the male threads on the 90* fitting. thats it! Unscrew your gas cap to relieve some of the fuel pressure Wrap the banjo bolt with some shop rags and remove the 12mm bango bolt. Stock bango bolt removed. Clean the surfaces of any debris. Install the new banjo bolt with new crush washers Install the 1/8" 90 fitting. Then install the fuel pressure gauge An overall shot of the setup Check your fuel pressure at idle with the fpr vacuum hose connected, then check it with the fpr vacuum hose disconnected. congrats you have successfully installed a fuel filter mounted fuel pressure regulator. enjoy, -Luke

Registered and logged-in users don't see this ad! Register your free account today.