DIY: remove front bumper for 6th gen civic
01-11-2006, 04:46 PM
#1
WRX cuz Honda won't wagon
Thread Starter
Join Date: Oct 2003
Location: San Jose, CA
Posts: 1,725
Likes: 0
Received 0 Likes
on
0 Posts
DIY: remove front bumper for 6th gen civic
Quick DIY for removing the front bumper cover for jobs like:
- installing a cold air intake (cai)
- installing horns
- installing fog lights
- installing korbach framelocks
- making your car look ghetto
All pictures are from:
http://www.grillcraft.com/installs/i...iew&install=76
This is where I got the picture instructions to remove my bumper the first time.
6th gen civic:
pop off the 7 or so clips (pop the center first, pull center out, then pull the outer plastic):
Remove the phillips screws in both fenders:
Remove the 3 10mm bolts underneath the front:
Pull the bumper cover straight forward off the car carefully:
- installing a cold air intake (cai)
- installing horns
- installing fog lights
- installing korbach framelocks
- making your car look ghetto
All pictures are from:
http://www.grillcraft.com/installs/i...iew&install=76
This is where I got the picture instructions to remove my bumper the first time.
6th gen civic:
pop off the 7 or so clips (pop the center first, pull center out, then pull the outer plastic):
Remove the phillips screws in both fenders:
Remove the 3 10mm bolts underneath the front:
Pull the bumper cover straight forward off the car carefully:
