HELP! 5 speed swap problem w/99 Accord.
I just did a 5 speed swap on my 99 Accord. I used a trans from a 96 Prelude. I had to use the driver side axel from a Prelude because the Ends of the axel are not the same. I did not make it 300 mile before I blew the new axel out of the car. I reinstalled another axel thatís when I noticed that these axels are not the same length. What do I need to do to fix this problem? Do I need to replace the Trans with one from a 6th Gen Accord? Are there different axels that can be used for the driver side? Iím sure this has come up before, and I looked all day to find a similar post. I got a Show coming up soon and I donít want to brake down again. Thanks.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.