Heater Blower Fan not working on First 2 speeds - Honda-Acura.net

hsacura · 08-26-05, 10:30 PM

I have an Acura 1.6 EL, 1998 and the Heater/AC Fan blower does not work on the first 2 speeds. Just before this happened there was a loud humm from the fan. Now no humm and no fan at first 2 speeds.

I opened up the glove compartment and I can hear the motor humming at the first 2 speeds, it is a quite humm (thus getting power, but may be not enough current).

Any ideas?

Registered and logged-in users don't see this ad!
Register your free account today.

Tanker · 08-27-05, 02:05 AM

Try checking the blower resistors. They're usually located on the blower itself.

Image Source

`

hsacura · 08-29-05, 09:20 PM

thanks I will check that out.

hsacura · 09-12-05, 06:59 PM

Blower resistor located on top of the Heater Blower was blown. Part number 79330-SR3-A01 replacement part from Acura, cost $ 28 Canadian.

This is located right behind the Glove Compartment and has a Rectangular plug about an inch wide going into it. 2 screws to remove.

Thanks for your help.

08-27-05, 02:05 AM	#2
Tanker Registered User Join Date: Aug 2005 Posts: 28	Try checking the blower resistors. They're usually located on the blower itself. Image Source ` __________________ Plug-In Hybrids

09-12-05, 06:59 PM	#4
hsacura Registered User Join Date: Aug 2005 Posts: 3	Blower resistor was blown Blower resistor located on top of the Heater Blower was blown. Part number 79330-SR3-A01 replacement part from Acura, cost $ 28 Canadian. This is located right behind the Glove Compartment and has a Rectangular plug about an inch wide going into it. 2 screws to remove. Thanks for your help.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-29-05, 09:20 PM	#3
hsacura Registered User Join Date: Aug 2005 Posts: 3	thanks I will check that out.