Honda-Acura.net

Go Back   Honda-Acura.net > Tech Forums > Do It Yourself
Measuring D16 Crank For Bearing Clearances. Where are the oem sizes stamped? Measuring D16 Crank For Bearing Clearances. Where are the oem sizes stamped?
Register FAQ Members List Arcade Calendar Search Today's Posts Mark Forums Read Dealer Listings

Do It Yourself This is where you will find step by step instructions so you can Do it Yourself!

Reply
 
Thread Tools Display Modes
Old 02-10-05, 03:05 PM   #1
W O T
Registered User
 
Join Date: Jan 2005
Posts: 42
Measuring D16 Crank For Bearing Clearances. Where are the oem sizes stamped?
m going to be measuring my D16 crank as soon as I get home after work tonight

Ive got the use of a 1-2" and a 2-3" micrometer

I know when measuring things at work sometime the measurement will vary by .001 at the same spot, just wonderring how exactly and where exactly the crank has to be measured.

Any pics or measurements showing steps or places or even after I get my measurements, what number co-incide with what bearing colors Im going to have to order would be appreciated

EDIT- I just realized that nothing has been done to this crank, isnt there OEM markings on it somewhere that show me the size of mains and rod bearings I will need to buy?
      Registered and logged-in users don't see this ad!
Register your free account today.
W O T is offline   Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!
Old 02-11-05, 02:32 AM   #2
W O T
Registered User
 
Join Date: Jan 2005
Posts: 42
Oh ya I know how to check the clearances with plastigauge AFTER I get the bearings, but dont I just have to measure the diameter of the crank rod journals and main journals to buy the bearings?
W O T is offline   Reply With Quote
Old 02-11-05, 02:22 PM   #3
W O T
Registered User
 
Join Date: Jan 2005
Posts: 42
......
W O T is offline   Reply With Quote
Old 02-12-05, 01:19 AM   #4
Provocateur
On permanent hiatus
 
Join Date: Jul 2004
Location: A forum with actual tech
Posts: 9,716
No. You have to compare the codes stamped on the block and the main caps. Then you buy the bearings.
Provocateur is offline   Reply With Quote
Old 02-12-05, 01:29 AM   #5
W O T
Registered User
 
Join Date: Jan 2005
Posts: 42
Heres two pics I made. I found out what size I need for the mains

Need some help with the rod sizing
W O T is offline   Reply With Quote
Reply

Bookmarks


« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off
Forum Jump


All times are GMT -5. The time now is 08:10 AM.

Honda-Acura.net - Code of Conduct - Archive - Top

Advertising - Privacy Policy - Terms of Use - Jobs
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.