building an exhuast

[adgj]

ok heres the deal i am buildin an custom exhuast for my car an 93 accord ex sedan and i have a few probs or question which ever way you look at it heres the parts i have a 2.25" x 25" glasspack and a magnaflow muffler wit a 2.25" inlet and i have two mandrel bent 90 elbow of the same diameter so i got under my car today to find out that after the two 90 degree bends theres an s curve thingy go to the stock mufler what is a easy way pass this i was thinkin bout a flex exhaust pipe but wasnt sure on what effect on performance it would have and then i cannot find a flange to fit the cat or is it a 3"flange if so i already have an solution for it any help will be appreciated thanks

Registered and logged-in users don't see this ad! Register your free account today.

[TekScream]

wooow! wait a minute! you mean to tell us that you're putting glass packs ona honda?! or on any car for that matter!? in my opinion thats a huge no no. id suggest that u sell it all and just go get a complete kit.

[augy]

Originally Posted by adgj

ok heres the deal i am buildin an custom exhuast for my car an 93 accord ex sedan and i have a few probs or question which ever way you look at it heres the parts i have a 2.25" x 25" glasspack and a magnaflow muffler wit a 2.25" inlet and i have two mandrel bent 90 elbow of the same diameter so i got under my car today to find out that after the two 90 degree bends theres an s curve thingy go to the stock mufler what is a easy way pass this i was thinkin bout a flex exhaust pipe but wasnt sure on what effect on performance it would have and then i cannot find a flange to fit the cat or is it a 3"flange if so i already have an solution for it any help will be appreciated thanks

goddam, son! just below the "L" on your keyboard you'll find something you didn't use nearly enough of in this post.

[adgj]

and yes im using glasspacks on a honda. its the same thing as and resonator but if im wrong please correct me so i will no the tru answer.next not to be mean or anything how did that help me?

[MilanoMan]

Originally Posted by adgj

and yes im using glasspacks on a honda. its the same thing as and resonator but if im wrong please correct me so i will no the tru answer.next not to be mean or anything how did that help me?

What augy meant was that if you use the period (if you couldn't figure out what he was hinting at) then people on the board could understand instead of reading through a bunch of half constructed sentences, all the while trying to comprehend and help you. Break up the sentences with proper punctuation and I bet you'd get some more responses. I myself don't think a cat is the same as a glasspack, and that WILL sound like ass on a honda. leave those for trucks.

[TekScream]

Originally Posted by adgj

not to be mean or anything how did that help me?

o man. i've gone through this one before. well, compliments of websters dictionary, i got this!

Pronunciation: 'fOr-&m, 'for-
Function: noun
Inflected Form(s): plural forums also fo·ra /-&/
Etymology: Latin; akin to Latin foris outside, fores door -- more at DOOR
1 a : the marketplace or public place of an ancient Roman city forming the center of judicial and public business b : a public meeting place for open discussion c : a medium (as a newspaper) of open discussion or expression of ideas
2 : a judicial body or assembly : COURT
3 a : a public meeting or lecture involving audience discussion b : a program (as on radio or television) involving discussion of a problem usually by several authorities

now it is for open discussion correct? ok well where does it say it's supossed to be helpful? I DONT mean to be mean but you're not always gonna get help in here. you're gonna get alot of one sided and biased opinions. it does say that it's basicly a pub for open discussion. im sorry that my response didnt help. and if i hurt your feelings, well sorry again. i was just trying to give you a little advice. and apparently you took it the wrong way. i guess at this point, well all i can say is, good luck with your exhaust setup.

[oscar_425]

Originally Posted by adgj

ok heres the deal i am buildin an custom exhuast for my car an 93 accord ex sedan and i have a few probs or question which ever way you look at it heres the parts i have a 2.25" x 25" glasspack and a magnaflow muffler wit a 2.25" inlet and i have two mandrel bent 90 elbow of the same diameter so i got under my car today to find out that after the two 90 degree bends theres an s curve thingy go to the stock mufler what is a easy way pass this i was thinkin bout a flex exhaust pipe but wasnt sure on what effect on performance it would have and then i cannot find a flange to fit the cat or is it a 3"flange if so i already have an solution for it any help will be appreciated thanks

First of all!!!! learn how to spell exhaust!!! not exhuast!!!!!

[adgj]

ok yeah i do have a prob with spelling exhaust i dont no y but thats beside the point rite?and it actually sounds really nice its a deep quiet tone with no buzzing or anything so im pretty happy with it.i completely understand were he is coming from and it is appreciated but all i wanted is opinions on my setup.not my grammer but thanks newayz

[TekScream]

Originally Posted by oscar_425

First of all!!!! learn how to spell exhaust!!! not exhuast!!!!!

ok well 1st things 1st... dont start dissing people when you dont know the half of whats going on. half of the technicians out there cant spell to save their life. im a prime example. and in reality, well they're damn good techs, and could probably fix anything out there. just because we're not spelling b superstars doesnt mean we cant work on cars or be some of the best tuners out there. second of all why are you sporting that civic? man that car has problems. first id check the intake where it connects to the intake manifold. looks like it's sitting funny. it's also a cheap ass brand. did you get the steel wheels with it? well if you didnt, id highly suggest that you sell those and get a set of em. pls! those things are hidious. and you might wanna consider in buying a new cluster gauge. ya know one with a friggen tach on it. and as for the sound system, well it's not all that but it's something. hope you have a decent alarm. o wait that wouldnt even be good enough. get some security on the damn thing. and next time, well think twice before you diss. and put some time and though into a post next time. 1 liners dont cut it.

[93EXaccord]

.... A-burnnn!

[adgj]

ok i got it on for good and it sounds good.sounds like a catback and if you dont believe me tell me how to get a sounds file on here and u can here it for yourself. its not extremely loud nor buzzy.and deep and nice.im mean my trunk makes more noise than it does at full throttle(with my system in).and my engine over comes it at 5000rpms.so yeah thanks for all your opinions and hope yall good futur tuning