How would i.... - Honda-Acura.net

RicoD · 05-09-04, 04:05 AM

Ok i know that the early LS motors had a different valve cover. ( I believe 94 and errr...95? not sure ) anyways i got a hold of a later model valve cover. Ive been searching the forums and all i can find is that the later model covers have a different PVC hose set-up and all i need to do is adapt it to work. How would i go about doing that so everything would still work right if i did have the swap in my car

EDIT: If possible...PICS too PLEASE...i dont get things too quickly just by reading

yes im slow :P

EDIT: Could i just put one of those air breather things on it? ( Or am i totally thinking of the wrong thing) I can basically put on the 96-00 valve cover right on my motor with only the PVC Hose being the minor problem right
?

Registered and logged-in users don't see this ad!
Register your free account today.

JimBlake · 05-10-04, 10:28 AM

(check your other thread...)
Hook up the one hose like it is on your old valve cover. Plug the other hose fitting on the new valve cover. (Your PCV valve is on a breather box behind the block.)

RicoD · 05-10-04, 08:52 PM

thank you now if a mod could delete ths thread please cuz its useless since there is two

05-10-04, 10:28 AM	#2
JimBlake Senior Member Join Date: Jan 2003 Posts: 1,994	(check your other thread...) Hook up the one hose like it is on your old valve cover. Plug the other hose fitting on the new valve cover. (Your PCV valve is on a breather box behind the block.) __________________ JimBlake '03 Accord, '07 Civic '01 Saab 9³, '05 9²x

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-10-04, 08:52 PM	#3
RicoD Pull my finger Join Date: Apr 2004 Location: Arizona Posts: 40,615	thank you now if a mod could delete ths thread please cuz its useless since there is two