97 3.0 CL EGR Cleaning
12-21-2010, 03:31 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
97 3.0 CL EGR Cleaning
Hi,
I am in the middle of gather info for cleaning my EGR. On videos they say you have to pull out the old port plugs (where are they located?)
Clean the ports with a brush, Where do i get these plugs from?
Acura USA has the EGR Kit replace kit which is an "upgrade fix" for 184USD (USA) or 240CDN (CANADA) (this includes new egr valve unit and a pipe that fits in the egr hole in the intake manifold and prevents this clogging up misshap.
i have seen videos on the 98 accord and the ports were cleaned by removing this metal Gasket like peice of metal that was taken off by screws and put back on. Iv seen this done to a prelude and it was those plugs. Does anyone know if the 97 3.0cl has those plugs that i have to remove with a slide hammer and replace them.
I am in the middle of gather info for cleaning my EGR. On videos they say you have to pull out the old port plugs (where are they located?)
Clean the ports with a brush, Where do i get these plugs from?
Acura USA has the EGR Kit replace kit which is an "upgrade fix" for 184USD (USA) or 240CDN (CANADA) (this includes new egr valve unit and a pipe that fits in the egr hole in the intake manifold and prevents this clogging up misshap.
i have seen videos on the 98 accord and the ports were cleaned by removing this metal Gasket like peice of metal that was taken off by screws and put back on. Iv seen this done to a prelude and it was those plugs. Does anyone know if the 97 3.0cl has those plugs that i have to remove with a slide hammer and replace them.
