hey mods, i was wondering if you can actaully create a special thread for me. If people want diagrams, what i will do is save them as a PDF and you can make a download section, and those that need diagrams can refer to this thread, look for their car year and model and just click to download. There is another topic aboud diagrams but its impossible to understand. If those that need diagrams can PM and i will update them fairly quickly. Well to let yall know i have diagrams to ALL car makes, year, and models. that includes trucks, suvs, and some bikes. I can guide you in alarm installs and audio system installs.
here are some quick links of requests so far. They will be in order Model then Year.
**If your car is LX and it shows EX, it will still have the same colours, just no factory alarm**
** Also Navi are the same same cars without the Navigation, so dont hesitate.**
no problem. alarm or audio? oh well its all included in the PDF, i have access to audiovox and scytek digrams. if u want both, just ask. im going to upload both. http://www.4shared.com/file/31674702...avigation.html
just open zip, i have both in there. u can corss referance ur wires.
just a note to you h23sirlude, the door trigger wire is:
BLACK/WHITE (-) located @ DRIVERS KICK PANEL. usually it will be easily seen, if not, it will be in a gray plug, high up in the dash area. Always test with a DMM (digital volt meter) do not use test lights !!
Thanks Tedmond the scytek diagrams show unlock/lock and trunk pin and door trigger use the same wires. i still have problem with the door trigger. i hooked up the alarm door trigger to black/white at the driver kick panel, and only the driver door opened the siren will turn on. the alarm is precision_P10 (green wire)
Hello, if you have the diagrams (stereo and alarms, locks) that would be fantastic. have the 6-disc stereo on the 2005 Accord Sedan EX. Putting in a 4-channel Alpine amo and Kenwood powered sub for some extra base, and a remote starter. thanks!!!
"unlock/lock and trunk pin and door trigger use the same wires."
unlock/lock, trunk and door trigger all have their own wire. They are all located in the same area, however, the colour of wires are differant. What i suggest you to do is use a volt meter. test your wires. they may look the same, but wont work if wired incorrectly. if you cant get the alarm to trigger off the door pin, you can always run a wire straight up ur side pillar to the domelight itself. Domelight supervision will watch all doors for sure. just a thought.
in the same area, i know there are 2 orange and 2 black/white. arm your system; if ur doors do not lock, but when u press unlock inside the car (roll down window) see if it triggers ur alarm. if it does, u have it wired wrong. grab the OTHER black/white wire.
follow the link man, just give it 30 seconds or so and look for download file. its a zip file that contains 2 PDF documents. Scytek is more precise for alarm/start but audiovox is best for audio. like i said i will post both so people can cross referance their wires, but remember always test with a VOLT METER !!!
if they are both after market, grab a harness so u dont need to chop wires. from there, wire BOTH units harnesses together
Do you wish to have both on @ the same time or on at differant times?
1)If you decide if you want to run both seperatly (one on as the other is off)
-just wire both of them together and just solder and make sure the connection is solid. the catch is if you incase you turn both on, it will pop the fuse that runs the factory line.
2) to have each decks functional and running simultaniously
- connect all wires from the harness EXCEPT the switched 12v.
grab a relay and connect it up like so.
85 - 12volt switched from factory harness
86 - Ground
70 - High current 12volt fused (add up the fuse ratings of the 2 decks. Eg deck 1 - 15amps deck 2- 15 amps) your fuse rating you should use is 30 or 25 amps.
30 - To the 12volt switched to the Deck harnesses.
place a diode across terminal 86 and 86. white stripe (cathode) on 85.
that will prevent any fuses to pop. as the constant 12 is only there to hold memory for alarm clock etc.
I have a question, whenever I unlock/lock my doors, it makes this loud annoying sound and the windows roll down/up pretty slow... Is there a wire I can cut and fix the electric wire for the power window?
I believe someone installed the (aftermarket) keyless entry for the accord 96 because whenever I start the engine, it would lock the doors; has those functions. Thanks in advance.
your aftermarket system has ignition controlled door unlock and lock. if you can take a pic or find out what type of system you have, i can show u the wire that will need to be cut so the power windows will not roll up or down when you lock/unlock.
Ah, no. I think whoever installed that function hooked the electric wire to the window power? 'cause the windows go down really slow….
every time i turn on/off the engine, it has the alarm function on the door locks (lock or unlock it), but the noise is loud and annoying. is there a wire or something I can disconnect so the sound goes off?
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.