stock radio needs to be taken out - Honda-Acura.net

R34Lude · 06-25-04, 10:06 AM

I have a stock gsr radio/tape player that won't come out. I took out the ash tray part and it is suppose to come out but it is still in there tight. Am I missing other screws?? DO i have to take out some of the dash boards to get it out?

ziggdoggaroni · 06-25-04, 10:20 AM

on a lude hunh? hmm...... is there a bracket directly below the radio? if so, the radio could be bolted directly to that. i'm thinking you must be missing some screws somewhere. they're not hard to get out.

brand0n · 07-09-04, 06:21 PM

if youre talking about a 4th gen lude, youre going to want to completely remove the surrounding console, the little compartment below comes out with it, so it isnt necessary to seperate the two at this point.. the console is held on by screws on he lower right and left and by several at the very top above your HU.. you should see anything holding on the HU once it is removed.. and put your gear in reverse before you try and yank the bastard off

profuse007 · 07-21-04, 02:37 PM

wwww.installdr.com

06-25-04, 10:06 AM	#1
R34Lude 96teg Join Date: May 2004 Posts: 88	stock radio needs to be taken out I have a stock gsr radio/tape player that won't come out. I took out the ash tray part and it is suppose to come out but it is still in there tight. Am I missing other screws?? DO i have to take out some of the dash boards to get it out?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-25-04, 10:20 AM	#2
ziggdoggaroni Member Join Date: Oct 2003 Location: jax Posts: 39	on a lude hunh? hmm...... is there a bracket directly below the radio? if so, the radio could be bolted directly to that. i'm thinking you must be missing some screws somewhere. they're not hard to get out.

07-09-04, 06:21 PM	#3
brand0n Member Join Date: Aug 2003 Posts: 73	if youre talking about a 4th gen lude, youre going to want to completely remove the surrounding console, the little compartment below comes out with it, so it isnt necessary to seperate the two at this point.. the console is held on by screws on he lower right and left and by several at the very top above your HU.. you should see anything holding on the HU once it is removed.. and put your gear in reverse before you try and yank the bastard off

07-21-04, 02:37 PM	#4
profuse007 Registered User Join Date: Jan 2004 Posts: 46	wwww.installdr.com