NEED HELP with rear brake pad change. '95 Honda Accord Ex Sedan
I was able to complete the installation of the front pads with little difficulty, but the rears have proven to be a bigger problem. As far as I can tell, there are four bolts that I could remove, two on the top of the caliper that are protected by a rubber sleeve and two more less accessible bolts on the back. I removed the top two, but this had no effect. Rather than spend the time removing the rears to no avail, I thought I'd post here and get some tips. Also, is there anything else I should be aware of, as this is only my second time changing pads.
'95 Honda Accord Ex Sedan
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Search Engine Friendly URLs by vBSEO