Notices

H22 Sh??

Thread Tools
 
Old 12-14-2005, 07:27 AM
  #1  
1of9
Team Nines
Thread Starter
 
1of9's Avatar
 
Join Date: Dec 2004
Location: Suburbs, Minnesota
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default H22 Sh??

Hey all... I have a 96 Accord EX Sedan... I'm planning on purchasing this engine... http://www.mnsportcompacts.net/forum...ad.php?t=20941 from a local guy (good guy BTW). It's a SH engine... but I've heard of problems with swapping the SH engine into my car...? Like the tranny... the reason I want this one is because it's local and pretty darn cheap for the H22... any info on H22 SH w/ Accords would be good... Thanks!
Old 12-14-2005, 07:44 AM
  #2  
2.2L
Member
 
2.2L's Avatar
 
Join Date: Dec 2005
Location: Pensacola, FL
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

sorry bud, but thats not gonna happen. Your tranny will not bolt up to it.
Old 12-14-2005, 07:55 AM
  #3  
93jdmgsrhatch
Registered User
 
93jdmgsrhatch's Avatar
 
Join Date: Mar 2004
Posts: 539
Likes: 0
Received 0 Likes on 0 Posts
Default

don't bother more of a problem than its worth
Old 12-14-2005, 08:52 AM
  #4  
1of9
Team Nines
Thread Starter
 
1of9's Avatar
 
Join Date: Dec 2004
Location: Suburbs, Minnesota
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default

so this should be a no go?
Old 12-14-2005, 08:53 AM
  #5  
1of9
Team Nines
Thread Starter
 
1of9's Avatar
 
Join Date: Dec 2004
Location: Suburbs, Minnesota
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default

is there any alternative? Like just getting the engine w/o the tranny?
Old 12-14-2005, 09:04 AM
  #6  
2.2L
Member
 
2.2L's Avatar
 
Join Date: Dec 2005
Location: Pensacola, FL
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1of9
is there any alternative? Like just getting the engine w/o the tranny?
you would need to run a h22 motor that does not have atts for your accord tranny to bolt up to it. The back of the SH h22 block is configured differently than the base model or non atts motors. The reason for the different configuration is because the atts unit bolts to the back of the block. You would need to get quite a few custom things done to get this thing working.
Old 12-14-2005, 09:05 AM
  #7  
2.2L
Member
 
2.2L's Avatar
 
Join Date: Dec 2005
Location: Pensacola, FL
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1of9
so this should be a no go?
its not possible without custom work
Old 12-14-2005, 09:07 AM
  #8  
ACT I
Senior Member
 
ACT I's Avatar
 
Join Date: Jun 2005
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts
Default

sounds like my problem i think its a cable n hydraulic issue at least thats what i was told
Old 12-14-2005, 03:28 PM
  #9  
stereo
Senior Member
 
stereo's Avatar
 
Join Date: Jul 2004
Location: CA
Posts: 901
Likes: 0
Received 1 Like on 1 Post
Default

unless your willing to install ATTS in your car it's not worth the trouble. as I was going to use the SH motor and the complete ATTS system in my 5th gen was half way done installing ABS (Lx model) as it's needed for the ATTS to work and the deal fell through and ended up getting a non Sh motor. but it's not a simple drop in it requires alot of wireing ,adding sensors ,extra computer for ATTS ,new radiator with the cooler for the ATTS unit also the immobilizer unit has to be installed or it won't run.
Old 12-18-2005, 05:45 PM
  #10  
1of9
Team Nines
Thread Starter
 
1of9's Avatar
 
Join Date: Dec 2004
Location: Suburbs, Minnesota
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the help... I'll probably have to tell the seller I'm not a buyer ... but seriously, thanks for the help or else I would've skrewwed myself!!!




All times are GMT -8. The time now is 03:09 AM.