My driver side doors weather strip seems to not be sealed all the way. Whats the best way to seal the strip along the top of the door up (the piece on top of the window). Do I have to take it off or is there something available for me to seal it with.
B4 you change the strip try this little trick. roll the window ALL the way down. then open yor door. Place your knee on the window seal and grab the top corner of the door frame and give it a few (3-5) HARD pulls. it will warp the door back into shape and place the seal where it belongs when the door is closed.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-acura.net content, comments, or advertising. Honda-acura.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-acura.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Search Engine Friendly URLs by vBSEO