moomoo

i was going to install my o2 sensor simulator that came in today.. but the wiring paper that came with it is missing... so im at a loss to what wire to put to what on the harness on my second o2 sensor... does anyone know how to install this o2 sensor simulator?


------

97 cx hatch

SRT_Andy

Well, if it's an ECG, i have the directions posted on my homepage.\
http://import-velocity.no-ip.org

moomoo

im not sure what an ECG is.. but the site is down anyways.

im sure someone on here has installed a o2 sensor simulator :P

any help?

thanks

SRT_Andy

I have and the site is back up. Try again.

moomoo

thank you.. but my simulator isnt ecg it is from casper electronics.. it has four wires. i know which is which from the sim.. but im stumped on how to hook it to my car.. right now i have a half burnt o2 sensor that works half the time.. do you have any tips on instlaling it?
the diagrams helped some tho

SRT_Andy

Nah, sure don't. If the wire colors are the same, it might be the same wiring schema. Post some pics of yours so I can see what it looks like.

moomoo

well here is a pic of the actuall sim.. there is another part that plugs into this.. it has three wires. brown, purple, red..



im not sure which wire to bind to what. i dont want to cut the wrong wire and ruin future gas mpg..

any comments would be appreciated

moomoo

tt

moomoo

one last try i guess

does anyone know if its safe to cut the RED/WHITE wire to try this thing.. (97 civic hatch)

i figured out the wire colors, which is 12v and which is ground.. and which is the sensor wire.. but plugging the pigtail end of my simulator just into the harness doesnt work. it gets power but i sitll throw codes.

im wondering why there isnt more information on this :/
oh well..

SRT_Andy

Have you tried calling the people you bought it from and getting them to either fax you the instructions or scan them in and email them?