Notices

Light bulb seems to be fused to tail light socket.

Old 02-07-2011, 11:11 AM
  #1  
terre08
Junior Member
Thread Starter
 
terre08's Avatar
 
Join Date: Nov 2008
Location: Portland Oregon
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Light bulb seems to be fused to tail light socket.

Hi,

I have a 92 Civic Hatchback and when I tried to replace the light bulb in the tail/brake outer tail light it was fused to the socket or at least rather stuck. Anyone has any idea if I can use some sort of solution so I might be able to remove it? Honda charges 31.90 for the socket and I was thinking I might find another way so I don't have to replace all 3 sockets in the outer tail light?

Thanks and Best Regards,

Per Sjoblom

Oregon
Old 02-08-2011, 07:47 PM
  #2  
CivicSiRacer
Honorary Moderator Alumni
 
CivicSiRacer's Avatar
 
Join Date: Sep 1999
Location: Someplace with cones=AUTO
Posts: 8,735
Likes: 0
Received 0 Likes on 0 Posts
Default

Previous person probably didn't use bulb/electrical grease OR water got in there and caused it to corrode. You can try some vinegar and try to dip the socket/bulb in there (make sure to disconnect the battery terminal). And let it sit there for an hour or so. If not try some WD-40 in there and let it sit for 1-2 hours.
If that doesn't work a little heat from a hair dryer maybe to get the socket warm and to expand.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page



All times are GMT -8. The time now is 03:53 PM.