Help replacing antenna/pulling out of mast...
#1
Help replacing antenna/pulling out of mast...
I bought a universal for now and I unscrewed the two top torx screws , but cant get the broken part out, its a very short nub and on this kit it has the threaded studs so I need to remove it... Looks like a silver clip on it or something... any ideas?
#3
Get a smaller size drill bit,{smaller then the screw piece thats stuck} drill out the hole, !make sure its smaller then the screw! then if u have a set of taps get them out and re-tap the threads to the hole, {make sure its the same exact size and threads as the new screw} then tap it and u will have the old piece out and a new set of threads to screw it into.
Trust me ive done it came out perfect
Trust me ive done it came out perfect