Honda-Acura.net - View Single Post

mr.crx · 11-24-05, 08:56 PM

there is a housing around the thermostat that has two bolts that you will need to take off in order to get to it, after that is off make sure that the old seal comes completly out, then put the new one in and tighten it all back up. o ya dont forget to drain your radiator and bleed the system to make sure for no air bubbles when you put water back in!

11-24-05, 08:56 PM	#2
mr.crx Senior Member Join Date: Mar 2005 Location: phoenix, az Posts: 1,004	there is a housing around the thermostat that has two bolts that you will need to take off in order to get to it, after that is off make sure that the old seal comes completly out, then put the new one in and tighten it all back up. o ya dont forget to drain your radiator and bleed the system to make sure for no air bubbles when you put water back in! __________________ what is the point of driving if you cant drive fast! _________________________________________ 88' caddilac 88' Honda crx 90' integra 90' Honda Crx www.rzcustoms.com Take advantage of today, you are not promised a tomorrow. R.I.P. Jimmie Moyer (Jimbo) Clancy Ryan Billy Yearnd (B-unit) Ashley Martin Bobby Starks you are all greatly missed. please look over us.